The Megasat cascade multiswitch is suitable for receiving signals from two satellites and can support up to 8 participants. Additionally, it can be expanded with another multiswitch.

A multiswitch allows you to receive signals from multiple satellites simultaneously through a coaxial cable. Each satellite requires one LNB. It does not matter whether the second LNB is installed on the same satellite dish (multifeed) or on a second dish. The signals are bundled by the multiswitch and forwarded to the connected receivers.

The Megasat multiswitch series is equipped with the latest technology. All switches are compatible with Quad LNB (Quattro-Switch LNB), allowing you to integrate the multiswitch into an existing system even after installation.

Low attenuation and high decoupling of the reception levels ensure the highest picture and sound quality, even over long cable runs.

Cascade multiswitches can be connected in series, allowing you to customize the home distribution to your specific needs. Whether in a central or floor distribution setup, the Megasat cascade multiswitches always provide a flexible solution.

Technical specifications:
Frequency range DVB-S/S2: 950 – 2250 MHz
Frequency range DVB-T/T2: 47 – 862 MHz
Attenuation DVB-S/S2: 3 dB
Attenuation DVB-T/T2: 3 dB
Switching isolation: 28 dB
Decoupling DVB-S/S2: 38 dB
Decoupling DVB-T/T2: 25 dB
Output level DVB-S/S2: 100 dBμV
Output level DVB-T/T2: 85 dBμV
LNB power supply: max. 1200 mA
Power supply: AC 90 ~ 260 V, DC 18 V, 47 ~ 63 Hz
Operating temperature: -20° C ~ +50° C

Inputs:
2 × DVB-S/S2 (Horizontal High)
2 × DVB-S/S2 (Horizontal Low)
2 × DVB-S/S2 (Vertical High)
2 × DVB-S/S2 (Vertical Low)
1 × DVB-T/T2
1 × DC In

Outputs:
8 × DVB-S/S2 (to receiver)
2 × DVB-S/S2 (Horizontal High)
2 × DVB-S/S2 (Horizontal Low)
2 × DVB-S/S2 (Vertical High)
2 × DVB-S/S2 (Vertical Low)
1 × DVB-T/T2

Included in delivery:
Megasat Multiswitch 9/8 C, power supply, user manual.