Best selling Network switches from Renkforce
This page always stays fresh and updates automatically.
1. Renkforce RF-6385004 Network switch RJ45 5 port 1 GBit/s
The Renkforce switch is ideally suited for installation in tight spaces. All connections are located on the back of the device, allowing you to organize the cables perfectly. Each port has status LEDs that significantly simplify troubleshooting in case of service.
2. Renkforce 5 Port Fast Ethernet Switch for DIN Rail
This network switch for industrial use is optimized. The aluminum housing with an IP-30 protection rating is suitable for mounting on a DIN rail. If necessary, any of the 5 ports can trigger an alarm in the event of a link failure. The power supply can also be monitored. Configuration is done via DIP switches.
3. Renkforce Network Switch RJ45 1377754 5
The Renkforce switch is ideal for mounting in confined spaces. The power supply is built into the housing and all connections are located on the back of the device. So you can organize the cables perfectly and save the external power supply. Status LEDs are located on each port, making troubleshooting much easier in the event of service. Keep the optimal overview in the cable tangle.
The included magnetic feet are ideal for mounting on metallic surfaces, such as network cabinets (temporary).
All ports can be operated with a data transfer rate of up to 1 GBit/s. This allows you to access large amounts of data quickly.
Heat dissipating metal housing without fan
This metal housing can optimally dissipate heat to the outside, thus increasing the longevity enormously. In addition, the Renkforce switch is very quiet during operation, as no fan is installed in the housing.
Equipped with the environmentally friendly Green Eco Power function
This function automatically detects the connection status. This can reduce the power consumption of the ports that are idle. This enables great energy saving. When LAN ports are idle, about half of the power consumption can be saved.
4. Renkforce Switchsuperslim Switch
This small network switch distributes a single LAN connection to four network ports. Its optimized power consumption makes an external power supply unnecessary - a USB port is sufficient. Lightweight, compact, and barely thicker than the built-in network ports, the network switch can be discreetly placed. It can even be easily hidden behind flat-screen TVs. Thanks to the USB power supply, it only consumes energy when the connected device is running. When traveling in hotel rooms or in meeting rooms at the office, the switch does not take up space in the laptop bag and is always ready for use when additional network connections are needed.
5. Renkforce 8 Port Gigabit Switch for DIN Rail
This network switch for industrial use is optimized. The aluminum housing with an IP-31 protection rating is suitable for mounting on a DIN rail. The power supply is designed with redundancy and is provided via a terminal block, which can be easily disconnected in case of service. Additionally, a relay contact for warning purposes can be tapped from the terminal block. If needed, any of the 8 ports can trigger an alarm in the event of a link failure. The power supply can also be monitored. Configuration is done via DIP switches.
6. Renkforce 5 port switch mini USB power supply
This network switch is optimized for low power consumption and, unlike conventional devices, does not require an external power supply. Simply use a USB port from any device to power the switch, such as a TV, gaming consoles, network-capable devices in commercial use, etc. A practical energy-saving effect: the network switch only consumes power when the connected device is running. With a fast transfer rate of up to 1000 MBit/s, waiting times when copying over the network are significantly reduced. Special feature: USB power supply.
7. Renkforce Rf-4270245
This network switch is optimized for low power consumption and, unlike conventional devices, does not require an external power supply. Simply use a USB port from any device to power the switch, such as a TV, gaming consoles, network-capable devices in commercial use, etc. A practical energy-saving effect: the network switch only consumes power when the connected device is running. With a fast transmission rate of up to 1000 MBit/s, waiting times when copying over the network are significantly reduced.
8. Renkforce RF-GES-400 Netzwerk Switch RJ45 4 Port USB-Stromversorgung
1 to 4 Ethernet Splitter 1000Mbps Ethernet Cable Splitter helps resolve connection issues caused by inadequate wiring. It is powered via the included USB cable and supports four computers for a seamless network connection, allowing you to expand your network ports.
The Ethernet port splitter can divide a network connection into four outputs and supports a maximum throughput of 1000 Mbps per Ethernet cable without signal interference. The cable transmission distance can reach up to 100 meters.
The computer network switch offers flexibility and compatibility to meet all your networking needs and is compatible with most network Ethernet cables, such as Cat8, Cat7, Cat6, Cat5, and Cat5e. It is also compatible with switches, routers, TVs, set-top boxes, PCs, and computers.
The RJ45 extension connector simplifies the installation process by powering the device with the included 5V USB cable and connecting it to the adapter for use. Reduce confusion during network setup and enjoy a stable network connection!
The 1 to 4-port Ethernet adapter uses an aluminum alloy to enhance the durability of the network distributor. The improved PCB board ensures more stable signal transmission, and the LED indicator light helps you clearly monitor performance and data.
Network switches
EUR28,62
Renkforce RF-GES-400 Netzwerk Switch RJ45 4 Port USB-Stromversorgung
5 ports
9. Renkforce RF-GES-200 Netzwerk Switch RJ45 2 Port USB-Stromversorgung
This Gigabit Ethernet splitter is designed to solve connectivity issues caused by inadequate cabling. It is powered via the included USB cable and supports two computers using an Ethernet cable simultaneously. A simple and efficient network splitter that allows you to expand your network connections.
Maximum transmission speed of 1000 Mbps: With an Ethernet splitter, the network connection can be divided into two outputs, with a maximum throughput of 1000 Mbps per cable set and no crosstalk between the signals of the two cable sets. Therefore, it is ideal for situations where large amounts of data need to be transferred quickly and efficiently. Note: This speed is the maximum speed for the chipset; the actual speed depends on the connected device.
Wide compatibility: The RJ45 8P8C LAN Internet Splitter Connection Extender is suitable for Cat8, Cat7, Cat6, Cat5, and Cat5e network Ethernet cables and can be used with ADSL, hubs, switches, TVs, set-top boxes, routers, wireless devices, computers, etc. Elegant and compact, it is easy to carry and transport from one place to another. You can set up this compact Gigabit Ethernet adapter anywhere without taking up too much space or compromising its performance. Power supply via the included USB cable.
Network switches
EUR20,02
Renkforce RF-GES-200 Netzwerk Switch RJ45 2 Port USB-Stromversorgung
2 ports
10. Renkforce Ethernet Switches superslim USBPower supply
This small network switch distributes a single LAN connection to two network ports. Its optimized power consumption makes an external power supply unnecessary – a USB port is sufficient. Lightweight, compact, and barely thicker than the built-in network ports, the network switch can be placed discreetly. It can even be easily hidden behind flat-screen TVs. Thanks to the USB power supply, it only consumes energy when the connected device is powered on. When traveling in hotel rooms or in meeting rooms at the office, the switch doesn't take up much space in a laptop bag and is always ready to use when an additional network connection is needed.
Product order
See all products