Best Eaton products in the Smart home hubs category
On this page you'll find a ranking of the best Eaton products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Eaton xComfort switchgear input, power m.
High-performance switching actuator in a compact design 230VAC/16A with local 230VAC input and energy measurement. This device must be installed in a mounting box according to EN60670 and behind an accessory or blank plate that has at least two screw mounting points for securing the mounting box. Suitable for high switching capacity to control a variety of loads such as lighting, ventilation, heating, etc. The local input can be assigned to other devices like a standard binary input device to send switching signals.
2. Eaton CHCA-00/01: Smart Home Controller
Eaton xComfort Smart Home Controller CHCA-00/01, white, freely definable functional areas / rooms,,, up to 99 data points, scalable, control of room climate, display of device status, operation of devices, shading control, energy monitoring, time display, scenes, integration of cameras, own macros, email + SMS notifications.
3. Eaton Power Quality Smart Home xComfort Wireless USB Configuration Stick
USB stick, expands the wireless system with the comfort mode, meaning the communication between a Windows PC and the wireless modules. Using software (free), the entire wireless installation can be graphically displayed, linked, and modified. Additionally, various extra functions can be programmed into the wireless receivers, such as OFF with a warning, on/off delay (staircase automation), dimming speed, etc.
4. Eaton Touch screen easy Remote, control panel, 24 VDC, 4.3 inch, TFTcolor, 480 x 272 px, Res
Function: Remote touch display for the easyE4 control relay.
Description: Easy remote touch display, operating panel, 24 V DC, 4.3 inch TFT color, 480 x 272 px, resistive. Ethernet communication with the easyE4 via Ethernet. Common features of the series include an Ethernet interface and USB device.
Display type: Color display, TFT.
Touch technology: Resistive single touch.
Number of colors: 64 k colors.
Resolution: 480 x 272 pixels.
Screen diagonal: 4.3 inches.
Design: Plastic housing and glass front in plastic frame.
PLC license: No PLC function possible.
License certificates for onboard interfaces: Not applicable.
Integrated interfaces: 1 x Ethernet 100Base-TX/10Base-T, 1 x USB host 2.0.
Smart home hubs
EUR307,48
Eaton Touch screen easy Remote, control panel, 24 VDC, 4.3 inch, TFTcolor, 480 x 272 px, Res
5. Eaton Touch display for easyE4, 24VDC, 5.7 inch, TFTcolor, Ethernet
Function: Touch display for easyE4. Description: Touch display for easyE4, 24 V DC, 5.7 inch, TFT color, 640x480 px, Ethernet communication with the easyE4 via Modbus TCP. Common features of the series include an Ethernet interface and a USB device slot for an SD card. Display type: Color display. TFT touch technology with resistive touch. Number of colors: 64k colors. Resolution: 640 x 480 VGA. Screen diagonal: 5.7 inches. Design: Plastic case and glass front in a plastic frame. Operating system: Windows CE 5.0 (license included). PLC license: No PLC function possible. License certificates for onboard interfaces are not expandable.
6. Eaton Router 172943
Eaton Router CROU-00/01-S
Manufacturer: Eaton
Designation: Router
Type: CROU-00/01-S
KNX Bus System: No
KNX Radio Bus System: No
Radio Bus System: Yes
LON Bus System: No
Powernet Bus System: No
Other Bus Systems: xComfort
Mounting Type: Flush-mounted
Width in Division Units: 3
Number of Phases: 1
Nominal Voltage: 230 V
Protection Class (IP): IP20
Minimum Depth of Device Box: 18 mm
Eaton Router CROU-00/01-S: Additional Details
This generation of routers is particularly characterized by its compact dimensions and enhanced functionality. The router extends the xComfort RF network to locations where no control element (with internal router functionality) is required or installed. The device can be installed in switch boxes, junction boxes, or standard installation boxes.
EAN: 4015081695317.
7. Eaton xComfort Bridge 196811
With the xComfort Bridge, smart home technology becomes simple and user-friendly in every aspect, from installation and configuration to daily operation. No additional configuration software or programming knowledge is required. After the installation of actuators and sensors by the electrician, all further steps can be easily and intuitively completed by the end user using the smartphone app.
The xComfort Bridge app provides the following functions: Devices such as switch, dimmer, and blind actuators, buttons, and other sensors can be configured and controlled wirelessly at the device level, zone level, or through scenes. You can easily scan these devices or search for new ones through the app in just a few steps.
Features include:
1. Light control including time control and astronomical function
2. Heating control
3. Cooling control (from Q2/2023)
4. Blind control
5. Users with different permissions
6. Cloud backup and restoration of configuration
7. Remote access for secure internet access
8. Amazon Alexa and Google Home integration
The xComfort Bridge connects to the local WiFi router via an Ethernet LAN cable. After that, the smart home can be controlled using the xComfort Bridge app on iOS or Android devices. Built-in LEDs indicate the status and function of the xComfort Bridge.
The xComfort Bridge can be mounted on any wall, on 55-mm or 68-mm switches, on a distribution box, or an installation box. A set of rubber feet (included) also allows the xComfort Bridge to be placed securely on any horizontal surface.
Included in the package: mounting bracket, rubber feet, USB adapter, micro-USB cable, UTP LAN cable, screws, dowels, and adhesive strips.
