EUR147,14
be quiet! Pure Loop 2 FX
Question about be quiet! Pure Loop 2 FX
Which mainboard do you have? I would have connected the pump directly to "WPUMP" on the mainboard, if available. This can usually handle a higher current. I would connect the hub to the "RPM" output on the CPU fan of the mainboard. You can plug the other fans (including those from the radiator) into the hub as required. If you have not assigned the CPU fan connection of the mainboard, you must set the monitoring for this connection to "Ignore" in the BIOS. Otherwise there will be a warning message at startup because the mainboard has not recognised a fan and assumes that the CPU is not being cooled.
I have the MSI Z390 MEG ACE and plugged the pump into the pump fan on the main board and connected the the fans to the hub. However, I am a little short on ARGB/JRainbow connections to and cable is too short for the pump lights but will look to get an extension. I also have a Be Silent case which has a pwm fan hub so plugged the hub into the hub. All seems good so far.
Gigabyte X670 GAMING X AX
AM5, AMD X670, ATX
I connected the hub to the CPU fan and the pump to the hub as there is no connection for the pump.
Still no problems
AM5, AMD X670, ATX
I connected the hub to the CPU fan and the pump to the hub as there is no connection for the pump.
Still no problems
Crap! If there is an answer, please delete digitec team. Thank you :)