Top rated Glue
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. UHU Super Power superglue
This superglue is characterised by its particularly fast adhesive effect and is ideal for bonding small areas in the household. The adhesive is suitable for all bondable materials and can be dosed precisely thanks to its liquid consistency. The practical aluminium stand pipette rounds off the advantages in combination with the high dishwasher resistance.
2. UHU super power
Super Power Eagle Owl super glue 3 g is a crystal-clear, one-component reaction adhesive based on cyanoacrylate. It enables high-strength bonding to numerous materials in seconds to minutes, providing strong adhesion for metals such as steel, copper, brass, and aluminum, as well as for duromer and thermoplastic plastics.
3. UHU Superglue
Liquid super glue with a special 3D filling granulate for instant, gap-bridging repairs. It creates a highly strong, weld-like adhesive bond and can be sanded, drilled, and painted.
4. Loctite Screw lock 243
For securing and sealing threaded connections that need to be dismantled with hand tools. Hardens in the absence of air between tight metal surfaces. Prevents self-releasing and leaks caused by shocks and vibrations. Thixotropic behavior reduces the migration of the liquid product after application to the component. Robust curing performance. Suitable for use on active metals (e.g., brass, copper) and passive materials (e.g., stainless steel). Offers high temperature and oil resistance. Tolerates minor surface contamination from various oils such as cutting, lubricating, anticorrosive, and protective oils.
Glue
Quantity discount
EUR11,16 per piece for 2 units EUR2232,–/1l
Loctite Screw lock 243
19.90 g, 5 ml
5. Loctite 243 Screw lock
Loctite 243 is a universally applicable medium-strength threadlocker. This product secures screws, nuts, and studs against loosening due to vibrations while also providing sealing. It is suitable for all metals, including passive materials such as stainless steel, aluminum, and galvanized surfaces. It has proven tolerance to minor contamination from industrial oils, such as motor oils, corrosion protection oils, and cutting oils.
- Prevents loosening due to vibration
- Suitable for all metals
- Connections can be disassembled with hand tools.
6. UHU Plus Endfest
Solvent-free two-component adhesive based on epoxy resin for highest loads. The processing time is up to 90 minutes. Hardening time and final strength (up to 3000N/cm2) depend on temperature. Solid after 12 hours at room temperature. The adhesive bond is impact-resistant, resistant to aging and moisture. Also in the user-friendly double-chamber syringe for easy application of the 2 components in the correct mixing ratio.
7. UHU Plus Schnellfest
Solvent-free 2-component epoxy resin adhesive for heavy-duty requirements. Working time is approximately 90 minutes. Setting time and final strength depend on temperature. At room temperature, it hardens after 12 hours. It is shock-resistant and resistant to aging and humidity.
Also available in a user-friendly double syringe for easy ejection of the two components in the correct mixing ratio. It glues metal, glass, porcelain, ceramic, wood, marble, stone, concrete, thermosets, glass fiber, reinforced plastics, hard PVC, rubber, Styrofoam, and more. Not suitable for large glass surfaces, polyethylene, or polypropylene.
Surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix one part binder with one part hardener (equal lengths of strands). Apply adhesive to one side, or to both sides for rough materials. Place the parts together in exactly the right position without applying pressure.
8. UHU Plus Endfest 163 g
Solvent-free two-component adhesive based on epoxy resin for high loads. The processing time is up to 90 minutes, with curing time and final strength being temperature-dependent. It becomes solid after 12 hours at room temperature. The adhesive bond is impact-resistant, aging-resistant, and moisture-resistant. It is also available in a user-friendly double-chamber syringe that allows for easy application of the two components in the correct mixing ratio.
Materials: Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, thermosetting plastics, fiberglass-reinforced plastics, rigid PVC, rubber, and rigid foams such as Styrofoam. Not suitable for bonding large glass surfaces, polyethylene, or polypropylene.
Processing/Application Instructions: The bonding surfaces must be dry and free from dust and grease. Roughen smooth surfaces. Mix binder and hardener in a 1:1 ratio (strands of equal length). Apply adhesive on one side or both sides for rough materials. Fit parts together precisely without pressure. The working time (pot life) is approximately 90 minutes. Curing time and final strength depend on temperature, with strength being reached at room temperature in about 12 to 24 hours.
Temperature Curing Strength:
- 20 °C: 12 hours, 1200 N/cm²
- 40 °C: 3 hours, 1800 N/cm²
- 70 °C: 45 minutes, 2000 N/cm²
- 100 °C: 10 minutes, 2500 N/cm²
- 180 °C: 5 minutes, 3000 N/cm².
9. UHU Plus Endfest double chamber cartridge 50 ml
Solvent-free two-component adhesive based on epoxy resin for high loads. The processing time is up to 90 minutes. Curing time and final strength are temperature dependent. It becomes solid after 12 hours at room temperature. The adhesive bond is impact resistant, aging resistant, and moisture resistant. It is also available in a user-friendly double-chamber syringe for easy dispensing of the two components in the correct mixing ratio.
Materials: Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, thermosetting plastics, glass fiber reinforced plastics, rigid PVC, rubber, and rigid foam plastics, such as Styrofoam. Not suitable for bonding large glass surfaces, polyethylene, or polypropylene.
Processing/instructions for use: Adhesive surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix binder and hardener in a ratio of 1:1 (strands of equal length). Apply adhesive on one side, or on both sides in the case of rough materials. Join parts in a snug fit without pressing. Working time (pot life): approximately 90 minutes. Curing time and final strength depend on temperature, solid at room temperature after approximately 12 to 24 hours.
10. UHU Plus Immediate fixation
Mixing ratio binder : hardener = volume 1 : 1. Processing time (pot life) up to 2 minutes, handling strength is achieved after 5 minutes. The final strength is 800 N/cm². The adhesive dries transparent, is impact-resistant, and resistant to aging and moisture. Solvent-free 2K adhesive based on epoxy resin for particularly fast bonding on small surfaces. The processing time is up to 2 minutes, handling strength is reached after 5 minutes. The final strength is 8 N/mm². The adhesive bond cures transparent, is impact-resistant, and resistant to aging and moisture.
Glue
Quantity discount
EUR12,40 per piece for 2 units EUR354,29/1l
UHU Plus Immediate fixation
35 g, 35 ml