For cabinets with a base height of at least 60 mm, continuous side walls, or a separate base. Particularly suitable for office furniture in carcass construction, partition walls, and cabinets in continuous construction. Adjustable range of 60 - 80 mm or 80 - 120 mm. Adjustment can be made through the carcass bottom. Efficient processing in System 32 in combination with eccentric connecting fittings. Adjustment can be made through the connecting fitting. The base clip is designed for a distance from the back edge of the base to the spindle center of 37 mm. The position of the groove in the front base for receiving the clip is fixed to the center of the carcass. However, the clip also holds in any other height position within the carcass. The base adjuster is highly load-bearing: load capacity of 300 kg per piece, maximum 900 kg with three or more feet. The direct spindle guidance in the carcass ensures a stable stand for the furniture. The base adjuster is symmetrical and can therefore be used on both the right and left. Usable in System 32. Material: Steel, white plastic.