For cabinets with a plinth height of at least 60 mm, continuous side walls or separate plinths. Particularly suitable for office furniture in carcass construction, partition walls, and cabinets in continuous construction. Adjustment range from 60 - 80 mm or from 80 - 120 mm. The adjustment can be made through the carcass bottom. Efficient processing in System 32 in combination with eccentric connecting fittings. The adjustment can be made through the connecting fitting. The plinth clip is designed for a distance from the back edge of the plinth to the spindle center of 37 mm. The position of the groove in the front plinth for receiving the clip is fixed to the center of the carcass. However, the clip also holds in any other height position within the carcass. The plinth adjuster is highly load-bearing: load capacity of 300 kg per piece, maximum 900 kg with three or more feet. The direct spindle guidance in the carcass ensures a stable stand for the furniture. The plinth adjuster is symmetrical and can therefore be used on both the right and left sides. Usable in System 32. Material: Steel, white plastic.