Best selling Screws from Spax
On this page you’ll find a ranking of the best Screws from Spax. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Spax Sortiment Koffer T-Star Plus
The SPAX-typical T-STAR plus drive is a so-called hexalobular socket. This shape increases the contact surface of our T-STAR plus and the T-STAR plus bits sit perfectly in the screw head. The best possible power transmission from screwdriver to screw thanks to T-STAR plus enables you to work quickly and much more efficiently than with all other drives.
The countersunk head (or flat countersunk head) mills a recess into the wood with its polygonal underside ("pockets") and can therefore be countersunk without additional countersinking of the screw hole. The countersunk head is flush with the surface.
In contrast to the partial thread, the full thread extends over the entire length of the screw. The more threads a screw has, the greater the tensile and compressive forces that can be transferred from screw to wood. These fully threaded screws are primarily used for heavy-duty timber joints.
With WIROX, SPAX has developed a coating that is far superior to galvanising in terms of corrosion protection. No chromium(VI) is used with WIROX, the screws are just as resilient even after years in outdoor areas that are not directly exposed to the weather, and are also environmentally friendly. WIROX screws are the first choice for all open structures without direct weathering, such as carports or pergolas. For direct weathering, such as patios, the use of stainless steel screws is recommended.
2. Spax Senkmultikopf T-Star Plus T20 Teilgewinde Wirox
The SPAX typical drive T-STAR plus is a so-called internal hexagon. This shape increases the contact area of our T-STAR plus, allowing the T-STAR plus bits to fit perfectly in the screw head. The optimal power transfer from the screwdriver to the screw provided by T-STAR plus enables fast work and is significantly more efficient than all other drives. The countersunk head (or flat countersunk head) carves a recess into the wood with its polygonal underside ("pockets") and can therefore be sunk without additional countersinking of the screw hole. The countersunk head sits flush with the surface. The screws with partial thread are excellent for fastening thin components such as wood-based panels, boards, or floorboards to thicker components like timber or beams. The short thread screws into the thick component, while the unthreaded shaft remains in the attachment. This creates maximum clamping pressure between the two. The unthreaded part should be at least as thick as the attachment. The term 4CUT refers to the square shape of the screw tip. These edges displace the wood fibers during insertion and create space for the screw's core diameter. The spreading pressure exerted by the core in the wood is thus reduced, preventing the wood from splitting near the edge. The required torque of the cordless screwdriver is also reduced, as the screw's core does not have to "squeeze" into the wood. With WIROX, SPAX has developed a coating that is far superior to galvanization in terms of corrosion protection. WIROX does not use chromium (VI), and the screws remain just as durable and environmentally friendly even after years in outdoor areas that are not directly exposed to the elements.
Screws
EUR39,70 EUR0,08/1pcs.
Spax Senkmultikopf T-Star Plus T20 Teilgewinde Wirox
500 Screws per piece
3. Spax Senkmultikopf T-Star Plus T40 Vollgewinde Cut Wirox
With milling ribs under the head and a CUT tip for screwing without pre-drilling. High tensile and compressive forces are accommodated by the full thread compared to partial thread screws.
Screws
EUR23,67 EUR0,47/1pcs.
Spax Senkmultikopf T-Star Plus T40 Vollgewinde Cut Wirox
50 Screws per piece
4. Spax A2 Senkmultikopf T-Star Plus T20 Teilgewinde
The SPAX typical drive T-STAR plus is a so-called internal hexagon. This shape increases the contact surface of our T-STAR plus, allowing the T-STAR plus bits to fit optimally in the screw head. The best possible power transfer from the screwdriver to the screw through T-STAR plus enables quick work and is significantly more efficient than all other drives. The countersunk head (or flat countersunk head) carves a recess into the wood with its polygonal underside ("pockets") and can therefore be sunk without additional countersinking of the screw hole. The countersunk head sits flush with the surface. The screws with partial thread are excellent for fastening thin components such as wood-based panels, boards, or floorboards to thicker components like beams or timbers. The short thread screws into the thick component, while the unthreaded shaft remains in the attachment component. This creates maximum clamping pressure between the two. The unthreaded part should be at least as thick as the attachment component. The term 4CUT refers to the square shape of the screw tip. These edges displace the wood fibers during insertion and create space for the screw's core diameter. The spreading pressure exerted by the core in the wood is thus reduced, preventing splitting of the wood near the edges. The necessary torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood. The abbreviation A2 in our stainless steel screws comes from the alloy of the steel. Screws made of stainless steel A2 offer high protection against corrosion and medium strengths. Their resistance to seawater and acids is low. Therefore, they are used for outdoor applications in areas far from the coast.
5. Spax A2 Halbrundkopf T-Star Plus T20 Vollgewinde
The SPAX typical drive T-STAR plus is a so-called internal hexagon. This shape increases the contact area of our T-STAR plus, allowing the T-STAR plus bits to fit perfectly in the screw head. The optimal power transmission from the screwdriver to the screw provided by T-STAR plus enables quick work, significantly more efficiently than with any other drives.
If screw connections can also look good when needed, our universal screw with a pan head is an example. The spherical screw head with T-STAR plus or cross-slot Z-drive is suitable for the visible fastening of metal fittings on wood, with the underside of the head lying flat against the metal. The WIROX surface adapts to the color of the respective silver-colored metal fittings.
In contrast to partial threads, the full thread extends over the entire length of the screw. The more threads a screw has, the greater the tensile and compressive forces that can be transferred from the screw to the wood. Our full-thread screws are primarily used for high-load wood connections.
The term 4CUT refers to the square shape of the screw tip. These edges displace the wood fibers during insertion and create space for the screw's core diameter. This reduces the spreading pressure exerted by the core in the wood and prevents the wood from splitting near the edges. The necessary torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood.
The abbreviation A2 in our stainless steel screws comes from the alloy of the steel. Screws made of stainless steel A2 offer high protection against corrosion and medium strengths. Their resistance to seawater and acids is low. Therefore, they are used for fastening in outdoor areas far from the coast.
6. Spax Rueckwandkopf Kreuzschlitz Z2 Vollgewinde Wirox
The Kraftangriff Kreuzschlitz Z is an advancement of the basic Phillips screwdriver drive developed by the Philips Screw Company. The difference lies in the fact that the four sides of the screwdriver blade are not tapered towards the tip. This increases the lateral grip of the bit and reduces the cam-out effect that occurs with conventional Phillips drives due to the tapering, as the torque of the cordless screwdriver pushes the screwdriver bit upwards.
Where the countersunk screw is designed to sink the screws flush, the lens countersunk head has a convex curvature. Depending on the type of screw and surface finish (stainless steel, nickel-plated, antique), these screws become a decorative element, for example, in furniture construction or when attaching baseboards.
In contrast to partially threaded screws, the full thread extends along the entire length of the screw. The more threads a screw has, the greater the tensile and compressive forces that can be transferred from the screw to the wood. Our full-thread screws are primarily used for high-load wood connections.
The term 4CUT refers to the square shape of the screw tip. These edges displace the wood fibers when screwing in and create space for the core diameter of the screw. The pressure that the core exerts on the wood is thereby reduced, preventing the wood from splitting near the edge. The required torque of the cordless screwdriver is also reduced, as the core of the screw does not need to be "pressed" into the wood.
A nickel alloy is a finishing process that gives the screws a chrome-like, slightly yellowish appearance. Nickel-plated screws are perfect for indoor use. For outdoor applications, we recommend our screws with WIROX coating for non-direct weather exposure, while for direct weather exposure, only stainless steel of quality A2 or A4 is recommended.
Screws
EUR89,59 EUR0,09/1pcs.
Spax Rueckwandkopf Kreuzschlitz Z2 Vollgewinde Wirox
1000 Screws per piece
7. Spax Terrasse A2 Zylinderkopf T-Star Plus T25 Fixiergewinde Cut
Delivery contents:
- 500x SPAX terrace screw 5.0 x 50 mm
Product description:
These terrace screws from SPAX feature a fixing thread that secures the deck board. The small cylindrical head sinks flush into the wood, providing a perfect appearance. They are particularly suitable for wooden terraces in outdoor areas and minimize creaking noises from the floor structure. The T-STAR plus ensures a clean fit of the bit and better guidance, for example, when working overhead. The small cylindrical head can be easily countersunk with reduced splitting effect in the wood, offering an impeccable look. The SPAX typical wave profile is designed for quick and secure screwing. The fixing thread also allows for a firm and permanent connection between two pieces of wood. The CUT tip enables precise positioning, allowing the screw to be driven in without pre-drilling (depending on the wood). This effectively reduces wood splitting. The stainless steel is particularly well-suited for outdoor applications exposed to direct weather conditions, as well as for use in damp areas.
Technical data:
Manufacturer: SPAX
Manufacturer number: 0537000500505
Material: Stainless steel
Head shape: Cylindrical head
Thread type: Fixing thread
Drive type: T-STAR plus
Bit size: Torx T25
Thread diameter: 5 mm
Total length: 50 mm
Head diameter: 7 mm
Partial thread length: 21 mm
Head height: 3 mm.
Screws
−6%
EUR58,21 was EUR62,20 EUR0,12/1pcs.
Spax Terrasse A2 Zylinderkopf T-Star Plus T25 Fixiergewinde Cut
500 Screws per piece
8. Spax Box systainer T-Loc I SENKMULTIKOPF T-STAR PLUS WIROX
Neat storage and secure transport with the Spax Box Systainer T-Loc I. The modular interior features individually adjustable dividers and is 100% compatible with other Systainers. The lock allows for easy closing, while opening is also simple even when boxes are connected. The connection feature enables quick linking of multiple boxes.
This set includes 1,400 chipboard screws in 12 sizes, with full and partial threads as well as hex drive T-Star Plus, 4CUT, WIROX® with a sliding layer.
Contents:
- 300 pieces 3.5 x 16
- 150 pieces 3.5 x 30
- 150 pieces 4 x 30
- 150 pieces 4 x 35
- 150 pieces 4 x 40
- 100 pieces 4 x 50
- 80 pieces 4.5 x 50
- 80 pieces 4.5 x 60
- 60 pieces 5 x 50
- 60 pieces 5 x 60
- 60 pieces 5 x 70
- 40 pieces 5 x 80
- Includes 5 T20 bits
Notes:
- The WIROX® coating is a chrome VI-free surface coating that offers significantly higher corrosion protection than conventional yellow electro-galvanization.
- Compatible with Festool Systainer.
Screws
EUR179,77 EUR0,13/1pcs.
Spax Box systainer T-Loc I SENKMULTIKOPF T-STAR PLUS WIROX
1385 Screws per piece
9. Spax T-Loc T-Star Plus
This SPAX Box Systainer³ T-Loc furniture construction holds a complete screw set with 2,900 screws in 12 dimensions. The modular Systainers are also known as storage boxes for power tools, which can be easily connected to each other. This SPAX Box Systainer thus becomes an integral part of your toolboxes, you always have everything you need with you and perfectly organised. In addition to the screws with T-STAR plus, countersunk and flat backing head, the kit also includes a five-strong T-STAR plus T20 bit team. Spax carcase connector screws with flat backing plate head and partial thread are nickel-plated and are ideal for carcase connections in furniture construction. SPAX back panel screws with flat back panel head in WIROX with full thread offer increased head pull-through forces when screwing together shelf and cupboard back panels without damaging the material. For you, this means: maximum organisation in the Systainer, tools and screws become a compact combination for the construction site.
10. Spax Fassadenschraube A2 Linsensenkkopf 8mm Fraesrippen T-Star Plus T20 Fixiergewinde 4cut
Article 89019 A 2 SPAX Facade fixing thread SPAX Facade screws with raised countersunk head - point - T-STAR - Dimension: 4.5 x 70/31 -T PU=S (100 pcs.) Further technical features: - Surface: Fixing thread - Design: SPAX Facade - Group code 89019.920- Standard type REYHER-Article 89019- Product type designation SPAX Facade screws with raised countersunk head, 4CUT tip, fixing thread, T-STAR plus
Content quantity: 100 pieces per carton.
Screws
EUR34,19 EUR0,34/1pcs.
Spax Fassadenschraube A2 Linsensenkkopf 8mm Fraesrippen T-Star Plus T20 Fixiergewinde 4cut
100 Screws per piece
Product order
See all products