Best selling Surge protection from Legrand
On this page you'll find a ranking of the best Legrand products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Legrand Surge arrester T1+2 7.5kA TT/TNS Voltage tap Collective contact
The Legrand surge protection combination device T1+2 7.5 kA is a highly advanced protection device specifically designed for use in TT and TN-S systems. It provides comprehensive protection against surges that can be caused by indirect lightning strikes or switching actions. With a nominal voltage of 230/400 VAC and a lightning impulse current of 7.5 kA per pole, this combination device is ideal for facilities and buildings that do not have external lightning protection. The spark gap base ensures reliable performance, while the integrated remote signaling contact and voltage tapping at L1 allow for easy monitoring and integration into existing systems. The combination device meets the requirements of the IEC/EN 61643-11 standard, making it a safe choice for surge protection.
- Type 1+2+3 according to IEC/EN 61643-11
- No leakage current for increased safety
- Built-in remote signaling contact for monitoring
- Suitable for TT and TN-S systems
- Protection against surges from indirect lightning strikes.
2. Legrand Surge arrester 412247 SPD Type2 40KA 3P+N TT / TNS Mains
The Type 2 surge protector from Legrand is a reliable device designed to protect electrical systems from surges caused by lightning strikes or switching actions. With a rated voltage of 230/400 VAC and a maximum discharge current of 40 kA, this device offers effective protection for downstream consumers in TT and TN-S systems. The surge protector is equipped with a 3+1 circuit, allowing for comprehensive safeguarding. The plug-in protection module ensures easy maintenance and is supported by a status indicator that displays the operational condition of the device. Installation is straightforward on a DIN rail, facilitating setup in various electrical systems. With a protection level of 1.7 V, the surge protector guarantees high efficiency and reliability in operation.
- Type 2 surge protector according to IEC/EN 61643-11
- Maximum discharge current of 40 kA per pole
- Easy maintenance through plug-in protection module
- Status indicator for operational readiness and replacement needs
- Suitable for TT and TN-S systems.
3. Legrand 414156
The Legrand surge protector 414156 is a highly advanced protective device specifically designed for photovoltaic systems. With a rated voltage of 1000 VDC and a maximum discharge current of 40 kA, this device provides effective protection against surges caused by lightning strikes or other electrical disturbances. The surge protector is certified according to the EN 50539-11 standard, ensuring high reliability and safety in operation. The Y-circuit and plug-in protection module allow for easy installation and maintenance. A status indicator informs users about the operational state of the device, enabling them to quickly determine whether the protection module is operational or needs to be replaced. With a compact design suitable for mounting on a DIN rail, the surge protector can be easily integrated into existing systems.
- Type 2 surge protector for PV systems
- Maximum discharge current of 40 kA per pole
- Plug-in protection module with status indicator
- Certified according to EN 50539-11
- Suitable for DIN rail mounting.
4. Legrand 412227
The Legrand 412227 surge protector is a reliable device designed to protect sensitive electrical equipment from surges caused by indirect lightning strikes or switching actions. This surge protector belongs to protection class Type 2 and is suitable for use in TT and TN-S systems. With a rated voltage of 230/400 VAC and a maximum discharge current of 20 kA per pole, it provides effective protection for downstream consumers. The device is equipped with a plug-in protection module that allows for easy maintenance, as well as a status indicator that shows the operational state of the device. It is mounted on a DIN rail, facilitating installation in electrical distributions. The Legrand 412227 is therefore an essential component for the safety of electrical installations.
- Type 2 surge protector according to IEC/EN 61643-11
- Maximum discharge current of 20 kA per pole
- Easy maintenance through plug-in protection module
- Status indicator for operational state
- Suitable for TT and TN-S systems.
5. Legrand 412253
The Legrand Type 1+2 combination surge protector is a highly advanced device specifically designed to protect electrical installations from overvoltages. With a rated voltage of 230/400 VAC and a lightning impulse current capacity of 8 kA per pole, this surge protector provides reliable protection against indirect lightning strikes, switching actions, and disturbances from overhead line feed-ins. It is suitable for use in TN-S systems and meets the requirements of the IEC/EN 61643-11 standard. The surge protector is equipped with a plug-in protection module that allows for easy maintenance. A status indicator informs about the operational state of the device, with a green display indicating that the device is ready for operation, while an orange display signals that the plug-in protection module needs to be replaced. Installation is conveniently done on a DIN rail, making it easier to integrate into various electrical systems.
- Protection against overvoltages from indirect lightning strikes and switching actions
- Easy maintenance through plug-in protection module
- Status indicator for operational readiness and maintenance needs
- Suitable for TN-S systems
- Complies with IEC/EN 61643-11 standard.
6. Legrand Surge arrester type 2, 4+0 circuit, 230/400 VAC, Imax 40 kA (Uc)320 VAC
The Legrand Type 2 surge protector with a 4+0 configuration offers effective protection against surges that can be caused by lightning strikes or switching actions. With a rated voltage of 230/400 VAC and a maximum discharge current of 40 kA, this device is designed for use in TN-S systems. It features a plug-in protection module that allows for easy maintenance, as well as a status indicator that signals the operational state of the device. The surge protector is suitable for mounting on a DIN rail and meets the requirements of test class Type 2 according to IEC/EN 61643-11. With a protection level of 1.7 V, it provides reliable protection for downstream consumers.
- Plug-in protection module for easy maintenance
- Status indicator: Green (ready for operation), Orange (replace module)
- Suitable for TN-S systems
- Protection level of 1.7 V
- Mounting on DIN rail.
Surge protection
EUR147,55
Legrand Surge arrester type 2, 4+0 circuit, 230/400 VAC, Imax 40 kA (Uc)320 VAC
7. Legrand 412257
The Legrand 412257 combined surge arrester is a highly advanced surge protector classified as both Type 1 and Type 2. It has been developed according to the IEC/EN 61643-11 standards and provides comprehensive protection for electrical systems against surges caused by lightning strikes, switching actions, or overhead line feed-ins. With a nominal voltage of 230/400 VAC and a lightning impulse current capacity of 8 kA per pole, this combined arrester is ideal for use in TT and TN-S systems. Installation is straightforward on a DIN rail, making setup easier. An integrated plug-in protection module allows for simple maintenance and interchangeability, while the status indicator clearly signals the operating condition of the device. The Legrand 412257 is therefore a reliable solution for surge protection in various applications.
- Combined surge arrester Type 1+2 for comprehensive protection
- Suitable for TT and TN-S systems
- Easy installation on DIN rail
- Integrated plug-in protection module for simple maintenance
- Status indicator for monitoring operating condition.
8. Legrand 412272
The Legrand Type 1+2 combined surge protector is a highly advanced device specifically designed for surge protection in electrical systems. With a rated voltage of 230/400 VAC and a lightning impulse current capacity of 12.5 kA, this combined surge protector offers reliable protection against surges caused by direct or indirect lightning strikes as well as switching actions. It is suitable for TN-C systems and meets the requirements of the IEC/EN 61643-11 standard. The surge protector is equipped with a plug-in protection module, allowing for easy maintenance. A status indicator informs about the operational state of the device, with green indicating readiness for operation and orange signaling the need to replace the protection module. Installation is done on a DIN rail, facilitating the setup in various electrical installations.
- Protection against surges from lightning strikes and switching actions
- Easy maintenance through plug-in protection module
- Status indicator for operational state and maintenance needs
- Suitable for TN-C systems
- Complies with the IEC/EN 61643-11 standard.
9. Legrand 412242
The Type 2 surge protector from Legrand is a reliable protective device specifically designed for use in TN-C systems. With a rated voltage of 230/400 VAC and a maximum discharge current of 40 kA per pole, this device provides effective protection against surges caused by indirect lightning strikes or switching actions. The surge protector is certified according to IEC/EN 61643-11 and features a 3+0 configuration, allowing for easy integration into existing systems. Equipped with a plug-in protection module and a status indicator, the device informs users about its operational state and signals when the protection module needs to be replaced. Installation is straightforward on a DIN rail, facilitating use in various applications. With a compact design and an IP20 protection rating, this surge protector is both functional and user-friendly.
- Plug-in protection module for easy maintenance
- Status indicator for monitoring protection status
- Suitable for TN-C systems
- Certified according to IEC/EN 61643-11
- DIN rail mounting for easy installation.
10. Legrand 3953
The Legrand 3953 surge protector is a highly advanced protective device specifically designed for use in electrical systems. It provides effective protection against surges caused by indirect lightning strikes or switching actions. With an integrated pre-fuse and a 3+1 circuit, this surge protector is suitable for TT and TN-S systems. The rated voltage is 230/400 VAC, while the maximum discharge current of 12 kA per pole ensures a high level of protection. The Legrand 3953 is equipped with a plug-in protection module that allows for easy maintenance, as well as a status indicator that clearly signals the operating condition. This device is a reliable solution for protecting downstream consumers and contributes to the safety of electrical installations.
- Integrated pre-fuse for additional protection
- Status indicator for monitoring operating condition
- Suitable for TT and TN-S systems
- Maximum discharge current of 12 kA per pole
- Easy maintenance through plug-in protection module.
Product order
See all products