Best selling Wood connectors from Sihga
On this page you’ll find a ranking of the best Wood connectors from Sihga. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Sihga St+AMMAvA-tzenf+AMMAvA-sse Herakulix M
The Herakulix M post connector from Sihga is an innovative wood connector specifically designed for outdoor use. With an integrated tilt compensation of up to 5 degrees in all directions, this connector allows for an aesthetically pleasing and structurally correct adaptation to uneven ground. The two-part system features a short installation path, significantly simplifying the assembly process. Once installed, the connector is height-adjustable, providing additional flexibility. Its high corrosion and splash water protection make it ideal for use in weather-exposed areas, making it a reliable choice for various outdoor construction projects. The Herakulix M post connector comes with all necessary accessories, including screws and an assembly manual, making the installation time-saving and practical.
- Integrated tilt compensation up to 5 degrees in all directions
- Height-adjustable when installed
- High corrosion and splash water protection
- Suitable for use in weather-exposed areas (NKL 3)
- Easy assembly with included accessories.
2. Sihga Stützenfüsse Pfalu S+
Fasteners for fence and railing posts, ideally suited for fences and privacy screens. It offers great stability and bending rigidity, as well as a stepless and easily accessible tilt adjustment of up to 4° in all directions. The straight and aligned appearance of the posts does not require elaborate leveling pads and is applicable to a concrete width of 15 cm. The fastening is done from below into the post.
Scope of delivery:
5 / 18 pieces of Pfalu S+ coated SC 6 in a mounting pack including assembly instructions
40 / 144 pieces of GoFix S+ screws 8.0 x 125 mm, coated SC 12, TX 40
20 / 72 pieces of GoFix S+ screws 8.0 x 195 mm, coated SC 12, TX 40
SIHGAFIX TX 40, SIHGAFIX TX ISK 5.
3. Sihga Wood connector Stabilix H
The Stabilix H wood connector from Sihga is an innovative solution for bracing frame constructions. It has been designed to minimize deformations and effectively absorb both horizontal and vertical forces, as well as moments caused by wind and snow loads. The connector can be pre-assembled at the factory, making installation easier and allowing for quick application. By eliminating the need for pre-drilling, assembly time is further reduced. Additionally, the Stabilix H allows for a lower construction height while maintaining the same entry height, making it a practical choice for various construction projects. Using this connector helps enhance structural integrity without the need for intrusive bracing.
- Absorbs horizontal and vertical forces as well as moments in frame constructions
- Minimizes deformations and increases structural integrity
- Factory pre-assembly for easy installation
- No need for pre-drilling, which shortens assembly time
- Allows for a lower construction height with the same entry height.
4. Sihga End-grain connector IdeFix
The IdeFix end grain connector from Sihga is an innovative solution for joining wood, characterized by its invisible and universal applicability. This wood connector offers high load capacity for both tensile and lateral forces, making it ideal for single or multiple-row end grain series connections. The design allows for a tensionable and detachable connection, ensuring flexible handling and adjustment during the construction process. Additionally, the IdeFix features minimal wood weakening, preserving the structural integrity of the wood. The included system screws facilitate assembly and ensure a reliable connection.
- High load capacity for tensile and lateral forces
- Tensionable and detachable for flexible applications
- Minimal wood weakening to maintain material integrity
- Ideal for single or multiple-row end grain series connections.
5. Sihga St+AMMAvA-tzenf+AMMAvA-sse ZaFix STZ
The ZaFix STZ support foot from Sihga offers a reliable and durable wood connection suitable for various applications in timber construction. With a special stainless steel cover sleeve, the thread is optimally protected, enhancing the longevity and stability of the connection. The innovative Series 300 allows for height adjustment while installed, enabling flexible adaptation to different requirements and conditions on site. These features make the ZaFix STZ an ideal choice for professionals who value quality and functionality.
- Durable wood connection for long-term stability
- Stainless steel cover sleeve protects the thread
- Height adjustable while installed for flexibility.
6. Sihga Wood connector Stabilix C
Versatile application, deformations are minimized, absorbs horizontal and vertical forces as well as moments in frame constructions from wind and snow loads, to be used without pre-drilling, no disturbing bracing for stiffening, lower height of the construction possible with the same retraction height
complete with all necessary screws.
7. Sihga End-grain connector IdeFix
Invisible, universally applicable wood connector with high load-bearing capacity in tensile and shear loads. It can be re-tensioned and disassembled, resulting in minimal weakening of the wood. Ideal for single or multi-row end cap connections. The system screws are included in the delivery.
8. Sihga Justiersystem Distancer 25
The Distancer adjustment system from Sihga is an innovative solution specifically designed for the assembly of wooden beam and plywood constructions. It allows for quick and precise attachment of the first component to a concrete floor slab, eliminating the need for tedious shimming with leveling pads. The fixation is achieved by simply screwing into the concrete slab, ensuring high stability. This prevents unwanted slipping or shifting during the assembly process and ensures an efficient and reliable installation. The system is ideal for applications in the terrace sector and offers flexible adjustment to different heights.
- Adjustment range of 8 to 40 mm for flexible adaptations
- Easy fixation by screwing into the concrete slab
- High stability without unwanted slipping
- Suitable for wooden beam and plywood constructions.
9. Sihga St+AMMAvA-tzenf+AMMAvA-sse Herakulix+AMIArg- M
The Herakulix M support foot from Sihga is an innovative construction fitting specifically designed for connecting wooden components. This two-part system offers an integrated tilt compensation of up to 5 degrees in all directions, allowing for flexible adaptation to various construction requirements. The short insertion depth facilitates installation and ensures efficient handling. Additionally, the Herakulix M features high corrosion and splash water protection, making it particularly durable and resilient. The impact pin for end-grain screws ensures a secure connection, while the included 8 pieces of GoFix HK 6.0 x 60 mm TX 25 screws with full thread guarantee reliable assembly. Made in Germany, this construction fitting meets the highest quality standards and is an excellent choice for demanding construction projects.
10. Sihga Stützenfüsse Pfalu
Mountings for fence and railing posts, ideally suited for fences and privacy screens. They provide great stability and bending resistance, with a continuously adjustable and easily accessible tilt adjustment of up to 4° in all directions. The straight and aligned appearance of the posts does not require elaborate leveling plates and is applicable to a concrete width of 15 cm. The mounting is done from below into the post.
The delivery includes:
- 5 or 18 pieces of coated SC 6 post anchors in a mounting set including assembly instructions
- 20 or 72 pieces of BeziFix anchors ZF 7.5 x 60 mm, coated SC 12, TX 40
- 20 or 72 pieces of GoFix screws S+ 8.0 x 195 mm, coated SC 12, TX 40
- SDS drill 6 x 160 mm, SIHGAFIX TX40 and SIHGAFIX ISK 5.
Product order
See all products