1. kaiserkraft Workis 11 LED machine lamp, 2.5 W, 100 lm, IP65, 6000 K, daylight white.

LED machine light Workis 11, 2.5 W, 100 lm, IP65, 6000 K, daylight white. Dust and splash-proof according to IP65. Concentrated, powerful point light. Flexible gooseneck for easy adjustment and positioning. Water and oil resistant, ideal for the automotive, mechanical engineering, and workshop sectors.

With the gooseneck lamp, you have full flexibility for powerful illumination of a small area. Ideal for lighting during assembly work or general tasks at the workplace or on machines. The high-quality flexible hose allows for quick and precise positioning as desired. The light is balanced and soft, with various options for narrow and wide beam angles. At the same time, the flexible adjustment minimizes glare.

The lamp is water and oil resistant, making it the ideal light for the automotive, mechanical engineering, and workshop sectors. The built-in magnet at the base allows for secure attachment and also features four screw holes to ensure a stable stand on non-magnetic surfaces. The lamp requires a 24 V AC/DC power supply, which can be easily connected to the open wire ends. Operating temperature range: -10 °C to +55 °C. more

Workshop lighting

EUR299,–

kaiserkraft Workis 11 LED machine lamp, 2.5 W, 100 lm, IP65, 6000 K, daylight white.

100 lm

2. kaiserkraft Workis 6.1 LED workstation/machine lamp, 230 V, 6000 K, IP67, 12 W.

Workis 6.1 LED Workplace/Machine Lamp, 230 V, 6000 K, IP67, 12 W.

This lamp features dust and splash protection rated IP67. Its compact size and low heat generation make it versatile for various applications. It can be rotated and fixed in place, and is extremely robust.

The slim LED lamp is suitable for a range of uses. The housing is made of anodized, extruded aluminum, providing maximum corrosion resistance. The cover is made of hardened borosilicate glass with hard plastic end caps that are oil-resistant. Silicone rubber seals ensure a long lifespan. The LED driver is installed in the housing, and the LEDs operate at a lower current to produce uniform light with minimal heat output. The light sources are largely invisible.

These lamps are characterized by their compact size, low thermal resistance, and minimal light output attenuation, making them ideal for illuminating machine interiors, cold storage areas, food production zones, pharmaceutical manufacturing facilities, aquaculture, and more. The operating temperature range is between -20 °C and +45 °C. The lamp can be connected via a safety plug (not included) or directly to the power supply, as the cable ends are open. The input power range is AC 100 - 240 V 50 Hz, allowing for worldwide operation. more

Workshop lighting

EUR299,–

kaiserkraft Workis 6.1 LED workstation/machine lamp, 230 V, 6000 K, IP67, 12 W.

998 lm

3. kaiserkraft Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 12 W.

Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 12 W.

This lamp features dust and splash water protection rated IP67. It has a small size, and the LEDs generate little heat. The lamp can be rotated and fixed in place, making it extremely robust.

The slim LED lamp is suitable for various applications. Its exterior housing is made of extruded aluminium, anodised for maximum corrosion resistance. The cover is made of hardened borosilicate glass with hard plastic end caps that are oil resistant. Silicone rubber seals ensure a long service life. The LED driver is installed in the housing, and the LEDs operate using lower current to produce uniform light while generating minimal heat. The light sources are largely invisible.

These lamps are characterized by their small size, low thermal resistance, and low lumen attenuation, making them an excellent choice for lighting the interior of machinery, cold storage rooms, food production, pharmaceutical production facilities, aquaculture, and more. The operating temperature range is from -20 °C to +45 °C. The lamp can be connected using an M12 machinery connector (24 V) with a 2-pin M12 male connector installed at the site of use, allowing for direct connection to your PLC system. more

Workshop lighting

−34%

EUR289,– was EUR439,–

kaiserkraft Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 12 W.

998 lm

4. kaiserkraft Workis 10 LED lamp with articulated arm, 10 W, 830 lm, IP65, 6000 K, daylight

LED Joint Arm Light Workis 10, 10 W, 830 lm, IP65, 6000 K, daylight white. Dust and splash-proof according to IP65. Concentrated, powerful point light. The lamp head can be rotated 300° and tilted 200°. Stable and flexible arm with magnetic base. High-temperature and oil-resistant. Powder-coated lamp head for high corrosion resistance. Silicone seals ensure high durability.

Whether at the workbench or for inspection at the machine, the LED joint arm light is designed for high demands in industrial environments. It provides focused lighting for specific tasks. Arm lengths: upper 270 mm, lower 190 mm. The lamp has a sturdy housing made of anodized aluminum, and the lens is made of hardened, oil-resistant plastic. Corrosion and high-temperature resistant, IP65 waterproof, suitable for various environments and applications.

The highly efficient LED chip with PC lens ensures high lumen output and even illumination. The arms with flexible joints allow for comfortable positioning of the lamp and precise control of the lighting direction. The light is used at CNC machine workstations, engraving machines, electrical discharge machines, during assembly and repair work, as well as in laboratories. Thanks to the magnetic base, it is stable. However, the magnets can be removed if needed, allowing the existing screw holes to be used for fixed mounting (4-fold) on surfaces.

For flexible use, the lamp base can be equipped with magnets. On/off switch on the lamp. Operating ambient temperature: -10 °C to +60 °C. Built-in electronic LED driver for operation at 100 - 240 V. Input voltage AC 100 - 240 V (50 - 60 Hz). Open cable ends for direct connection or plug connection, 1.5 m 3 x 0.75 H05RN-F cable. more

Workshop lighting

−16%

EUR429,– was EUR509,–

kaiserkraft Workis 10 LED lamp with articulated arm, 10 W, 830 lm, IP65, 6000 K, daylight

830 lm

5. kaiserkraft Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 20 W.

Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 20 W.

This lamp features dust and splash water protection with an IP67 rating. Its small size and low heat generation make it ideal for various applications. The lamp can be rotated and fixed in place, and it is extremely robust.

The slim LED design is suitable for different areas of use. The exterior housing is made of extruded aluminium, anodised for maximum corrosion resistance. The cover is constructed from hardened borosilicate glass with hard plastic end caps, making it oil resistant. Silicone rubber seals ensure a long service life.

The LED driver is installed in the housing, and the LEDs operate on lower current to provide uniform light while producing minimal heat. The light sources are largely invisible.

These lamps are characterized by their small size, low thermal resistance, and low lumen attenuation, making them an excellent choice for lighting the interiors of machinery, cold storage rooms, food production, pharmaceutical production facilities, aquaculture, and more.

The operating temperature range is from -20 °C to +45 °C. The lamp can be connected using an M12 machinery connector (24 V), with a 2-pin M12 male connector installed at the site of use for direct connection to your PLC system. more

Workshop lighting

−35%

EUR349,– was EUR539,–

kaiserkraft Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 20 W.

1997 lm

6. kaiserkraft Workis 6.1 LED workstation/machine lamp, 230 V, 6000 K, IP67, 20 W.

Workis 6.1 LED Workplace/Machine Lamp, 230 V, 6000 K, IP67, 20 W.

This lamp features dust and splash protection with an IP67 rating. Its compact size and low heat generation make it ideal for various applications. The lamp can be rotated and fixed in place, and it is extremely robust.

The sleek LED design is suitable for different areas of use. The housing is made of extruded aluminum, which is anodized to ensure maximum corrosion resistance. It has a cover made of hardened borosilicate glass with hard plastic end caps that are oil-resistant. Silicone rubber seals provide a long lifespan.

The LED driver is installed in the housing, and the LEDs operate at a lower current to produce even light with minimal heat generation. The light sources are largely invisible. The lamps are characterized by their compact size, low thermal resistance, and minimal light output attenuation, making them an excellent choice for illuminating machine interiors, cold rooms, food production facilities, pharmaceutical production sites, aquaculture, and more.

The operating temperature range is from -20 °C to +45 °C. The lamp can be connected either with a safety plug (not included) or directly to the power supply, as the cable ends are open. The input voltage range is AC 100 - 240 V 50 Hz, allowing for worldwide operation. more

Workshop lighting

EUR459,–

kaiserkraft Workis 6.1 LED workstation/machine lamp, 230 V, 6000 K, IP67, 20 W.

1997 lm

7. kaiserkraft Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 16 W.

Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 16 W.

This lamp features dust and splash water protection with an IP67 rating. Its small size ensures that the LEDs generate little heat. The lamp can be rotated and fixed in place, making it extremely robust.

Designed for various applications, the slim LED lamp has an exterior housing made of extruded anodised aluminium, providing maximum corrosion resistance. The cover is made of hardened borosilicate glass with hard plastic end caps that are oil resistant. Silicone rubber seals contribute to a long service life. The LED driver is installed in the housing, and the LEDs operate using lower current to produce uniform light while generating minimal heat.

The light sources are largely invisible, and the lamps are characterized by their small size, low thermal resistance, and low lumen attenuation. They are ideal for lighting the interior of machinery, cold storage rooms, food production, pharmaceutical production facilities, aquaculture, and more. The operating temperature range is from -20 °C to +45 °C. The lamp can be connected using an M12 machinery connector (24 V) with a 2-pin M12 male connector installed at the site of use, allowing for direct connection to your PLC system. more

Workshop lighting

−33%

EUR319,– was EUR479,–

kaiserkraft Workis 6.1 LED workstation/machine lamp, 24 V, 6000 K, IP67, 16 W.

1498 lm