Top rated Charge controllers
This page always stays fresh and updates automatically.
1. Victron Energy SmartSolar 100/30 MPPT
The Victron SmartSolar 100/30 MPPT Solar Charge Controller 12V/24V Battery is suitable for solar panels with a total power of up to 440 W (at 12V) or 880 W (at 24V). The charge controller can be easily configured and monitored via Bluetooth using an app. The ultra-fast Maximum Power Point Tracking (MPPT) significantly improves the yield from the solar cells, especially in overcast conditions. The built-in BatteryLife algorithm ensures optimal battery charging, even when the battery cannot be fully charged during a charging cycle, for example, due to shading or darkness preventing the solar panel from delivering charging power.
What our customers think
Pro
- App for configuration and current values
- Interesting data can be called up via Bluetooth
- with app for comprehensive measured values (Bluetooth version)
2. Victron Energy SmartSolar MPPT 75/15
Solar charge controller with ultra-fast Maximum Power Point Tracking (MPPT). Detection of the Maximum Power Point even in partial shading. Load output and flexible charging algorithms. Overheating protection and load reduction at high temperatures. Automatic battery voltage detection and intelligent battery management through load shedding. Maximized efficiency. By continuously monitoring the voltage and current output of your solar panels, the technology of the BlueSolar MPPT ensures that all available energy is extracted from the modules and stored. The advantage is particularly noticeable in partially cloudy skies and varying light intensity.
Remote control via Bluetooth or the Internet. You can remotely control and monitor the extensive functions of your BlueSolar MPPT charger and pair it with your smartphone or another device via VictronConnect. If your system is connected to the Victron Remote Management Internet portal, you have full access to your MPPT anytime and anywhere. Both services are available free of charge.
Prevention of damage and excessive discharge. The intelligent load output prevents damage caused by using empty batteries. You can configure the voltage at which the BlueSolar charge controller disconnects a load to prevent excessive discharge of your batteries. The device attempts to recharge the battery to 100% every day. If this is not possible due to bad weather, it raises the voltage threshold for disconnection daily until it is successful.
What our customers think
Pro
- Controllable via Bluetooth
- Simple operation via app
- Simple operation and setting via Victron app
3. Victron Energy Charge controller SmartSolar MPPT 100/20
A solar charger is supplied with energy via solar modules and then stores it in batteries. Using the latest and fastest technology, the SmartSolar maximises this energy production and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains the functionality of the battery and thus extends its service life. The SmartSolar charge controller even recharges a heavily discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulphated or otherwise damaged. Safety instructions: Models: 12/24/48 volts
What our customers think
Pro
- Super app
- Top device with Bluetooth
- Very positive
Contra
- Bluetooth range weak
- Cable clamps too small
4. Victron Energy SmartSolar MPPT 75/10
Ultra-fast Maximum Power Point Tracking (MPPT). Detection of the Maximum Power Point even in partial shading. Load output. Flexible charging algorithms. Overheat protection and load reduction at high temperatures. Automatic battery voltage detection and intelligent battery management through load shedding. A solar charger is powered by solar modules and stores this energy in batteries. Using progressive technology, the BlueSolar charge controller maximizes this energy harvesting and directs it intelligently to fully charge the batteries in the shortest time possible. The device maintains the battery's functionality, thereby extending its lifespan. By continuously monitoring the voltage and current output of your solar modules, the BlueSolar MPPT technology ensures that all available energy is extracted from the modules and stored. The advantage is most noticeable when the sky is partially overcast and light intensity is constantly changing. You can control and monitor the extensive features of your BlueSolar MPPT charger remotely: Bluetooth Smart allows setup and monitoring with a smartphone or other Bluetooth-enabled device. When your system is connected to the Victron Remote Management Internet portal, you have full access to your MPPT anytime and from anywhere. Both services are available free of charge.
What our customers think
Pro
- Comes with Bluetooth
- Bluetooth communication
5. Victron Energy Orion XS
Orion XS 12/12V - 50Amp DC/DC charger has been developed from scratch and redefines adaptive DC-DC charging. For use in dual battery systems charged with an (intelligent) alternator. This device not only ensures first-class performance, but also guarantees the safety of your system. With configurable input and output currents, you can keep an overview and be confident that your Smart BuckBoost will run at full power up to 40°C. The aluminium board's innovative cooling technology delivers an astonishing 98% efficiency without the need for fans. As an integral part of your Victron system, the Orion XS offers comprehensive (remote) monitoring and control capabilities, giving you complete control over your device and system. Fully configurable. Motor shutdown detection. Intelligent charging algorithms. Efficient cooling. Employs VictronConnect (Bluetooth or Ve.Direct. Remote monitoring optional. Set the input and output current precisely with simple controls. This helps to protect alternators from overload and charge the service battery correctly, especially with smart alternators. An unlimited number of Orion XS devices can be connected in parallel. This makes it easy to scale the output current to the requirements of your system. The Orion XS has customisable charging algorithms and 8 pre-set battery modes. For lead-acid batteries, these settings ensure optimum absorption times for both low and deep discharges. The Orion XS is equipped with comprehensive electronic protection against overload, short circuit and overtemperature. To prevent damage to lithium batteries, the charger switches off automatically at low temperatures and when the input voltage falls below a user-configurable blocking value. It thus protects the starter battery from deep discharge.
What our customers think
Pro
- No longer gets as hot as its predecessor
- more than half the size of its predecessor and more power to boot
- Low heat generation
6. Victron Energy Orion XS 1400
The Orion XS 1400 DC/DC charger from Victron Energy is an advanced charge controller specifically designed for use in dual battery systems. With a wide input and output voltage range from 9 to 35 volts, this device offers a reliable solution for vehicles with intelligent alternators that often deliver insufficient charging voltages. The Orion XS 1400 ensures precise and controlled charging, even over long cable runs such as those found in boats and motorhomes. Thanks to its advanced technology and adaptive four-stage charging algorithm, the service battery is charged efficiently while the starter battery remains protected from discharge. The safety of the system is guaranteed by integrated protective functions such as short-circuit and overheating protection. The charging current can be customised via the VictronConnect app, enabling flexible use.
7. Victron Energy SmartSolar MPPT
A solar charger is powered by solar modules and stores this energy in batteries. Using the fastest technology, the SmartSolar maximizes this energy collection and directs it intelligently to fully charge the batteries in the shortest time possible. The SmartSolar maintains the functionality of the battery, thereby extending its lifespan. The SmartSolar charge controller can even recharge a deeply discharged battery. It can operate with a battery voltage as low as 0 volts, provided that the cells are not permanently sulfated or otherwise damaged.
What our customers think
Pro
- Everything visible in the app
- Simple installation
8. Victron Energy SmartShunt 300A
The Victron SmartShunt 300A/50mV IP65 is an advanced battery monitoring shunt designed for reliable management of electrical systems. With a maximum current of 300 Amperes and a voltage drop of only 50 millivolts, this device offers precise monitoring capabilities that can be connected via Bluetooth to smartphones or tablets. The robust construction with IP65 protection makes the SmartShunt ideal for various installation environments, while the ability to capture state of charge, remaining time, and historical data allows for comprehensive analysis of battery status. The shunt is equipped with multiple connection options, including a VE.Direct port for wired connections and an additional port for enhanced monitoring features. Its compact design and durable black anodized aluminum housing ensure effective heat dissipation and easy installation, making the SmartShunt an efficient alternative to traditional battery monitoring systems.
- Bluetooth connectivity for easy smartphone integration
- IP65 protection for weatherproof applications
- Advanced monitoring features for secondary batteries
- Robust construction with durable aluminum housing.
9. Victron Energy BlueSolar MPPT 100/50
MPPT controller with an efficiency of over 98%. Fast MPPT controller for maximum energy yield. Fully programmable charging algorithm. Protection against overheating and short circuits. The algorithm maximizes energy output. Rated PV power, 12 V: 700 W. Rated PV power, 24 V: 1400 W. Especially in overcast conditions, when light intensity is constantly changing, an extremely fast MPPT controller can improve energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In the case of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to lock onto a local MPP, which may not be the optimal MPP. The innovative algorithm of the BlueSolar device maximizes energy yield by locking onto the optimal MPP. Fully programmable charging algorithm as well as eight pre-programmed algorithms that can be selected via a rotary knob. Overheating protection and load reduction at high temperatures. Protection against PV short circuits and PV reverse polarity. PV backflow protection.
10. Victron Energy Cerbo GX MK2
This completely new communication hub allows you to have perfect control over your system, no matter where you are, and maximizes its performance. Simply connect via the Victron Remote Management (VRM) portal or access a MFD or the VictronConnect app directly through the separate GX Touch, thanks to the additional Bluetooth capability. This latest addition to the GX series combines the best in connectivity and redefines smart power solutions in every way. Technical specifications: 2 VE.Bus, 3 VE.Direct, 3 USB, HDMI, 2x 2 Ve.CAN (CAN BMS capable isolated), MicroSD, 2 WIFI, LAN, 4 digital, 4 tank, 4 temperature inputs, 2 relays, customized RJ45 ports.
Product order
See all products