Top rated Ventilation fans
Here’s a ranking of the top rated Ventilation fans. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. Helios Minivent DN100
MiniVent M1 small fan, standard model with 2 performance levels (90/75 m³/h). With its excellent design, the MiniVent M1 harmoniously integrates into any environment, even in elegantly designed spaces. The closed, aesthetically pleasing facade completely prevents visibility into the dirty fan opening. It comes standard with a tightly closing backdraft damper. Thanks to the new ultraSilence technology, the noise level is only 25 dB(A) at a volume flow of 75 m³/h. It is universally applicable for ventilation in bathrooms, toilets, and other small rooms.
2. Helios M1/100 N / C Minivent DN100 two-stage with overrun
The MiniVent M1 small fan features two power levels (90/75 m³/h), a programmable run-on time, and interval operation. The start delay can be set to approximately 0, 45, 90, or 120 seconds, while the run-on time can be adjusted to about 6, 10, 15, or 21 minutes. The interval operation can be customized to approximately 0, 8, 12, or 24 hours. The electronic functions can be set to either high or low power levels. With its excellent design, the MiniVent M1 integrates harmoniously into any environment, even in stylishly designed spaces. The closed, aesthetically pleasing facade completely conceals the view of the dirty fan opening. It comes standard with a tightly sealing backdraft damper. Thanks to ultraSilence technology, the noise level is at 25 dB(A) with an airflow of 75 m³/h. It is universally applicable for ventilating bathrooms, WCs, and other small rooms.
3. Helios Fan insert
End assembly set: Fan unit including facade with built-in after-run switch. Start delay of approximately 1 minute. After-run time of about 5-6 minutes, depending on the operating duration and temperature. Otherwise as type ELS-VE6030. Electrical supply NYM-O 4x1.5 mm² ELS-VEZ 6030.
4. Helios HR 90 KEZ mini fan
Water jet protected plastic housing (IP 45) with grid cover. The upward-facing slats completely prevent visibility into the dirty intake opening and the built-in pre-rotor. Snap claw fastening for tool-free installation in pipes with a nominal diameter of 100 mm. Touch protection according to DIN EN 294. With a delay switch, delay time of 2 to 8 minutes.
5. Helios DN100 M1/100 F
MiniVent M1 small fan, with 2 power levels (90/75 m³/h) and humidity control. The run-on time can be set to approximately 6, 12, 18, or 24 minutes, and the electronic function can be adjusted to either the high or low power level. With its excellent design, the MiniVent M1 blends harmoniously into any environment, including stylishly designed spaces. The closed, aesthetically pleasing facade completely prevents visibility into the dirty fan opening. It comes standard with a tightly closing backdraft damper. Thanks to ultraSilence technology, the noise level is just 25 dB(A) at a volume flow of 75 m³/h. Universally applicable for ventilation in bathrooms, toilets, and other small rooms.
6. Helios MiniVent M1/120 F
The Helios MiniVent M1/120 is a small fan designed for use in bathrooms, showers, toilets, and smaller rooms. It can be installed in any position, including duct, pipe, ceiling, and wall installations. The fan features a closed, attractive facade with dimensions of 176 x 176 mm, which conceals the dirty fan opening. It offers two speed settings with a power consumption of 13/10 W and is equipped with a ball bearing for continuous operation. The fan has an IP45 rating, an airflow rate of 170/150 cbm/h, and a tightly closing backdraft damper. The installation depth is 70 mm and the connection diameter is 120 mm. Additionally, it comes with integrated humidity control and a run-on relay.
7. Wallair Wall and ceiling ventilators
Automatic wall and ceiling fan with delayed and quietly operating louvers. These prevent unwanted drafts and heat loss when the fan is stationary. The delay also ensures that no insects can enter. A lamp on the housing indicates the operation of the fan.
8. Wallair Duct extraction fan
For effective airflow, simply use this external inline fan. The preferred applications are long ductwork or ventilation systems with multiple small fans.
9. Helios Miniature fan HR90 KE
Helios Fans Mini Fan HR 90 KE
Manufacturer: Helios Fans
Description: Mini fan with ball bearings
Type: HR 90 KE
Mains frequency: 50 Hz
Rated voltage: 230 V
Installation type: Surface-mounted
Housing material: Plastic
Color: White
Airflow: 80 m³/h
Protection class (IP): IP45
Nominal diameter: 100 mm
Configuration: Standard
Design: Axial
Direction: Supply and exhaust ventilation
Additional details:
Small fan with ball bearings, splash-proof plastic housing (IP 45) with grille cover. The upward-facing slats completely prevent visibility into the intake opening and the built-in pre-rotor. Snap-fit mounting for tool-free installation in ducts with a nominal diameter of 100 mm. Touch protection according to DIN EN 294. Impeller with 5 profiled blades made of plastic, high efficiency. AC split-pole motor with thermal overload protection for continuous operation with maintenance-free, permanently lubricated ball bearings, non-reversible.
10. Maico ER 60 VZ
Version with delay timer: Switch-on delay approximately 50 seconds. Run-on time approximately 6 minutes. Not speed-controllable. Fan with cover and ISO coarse 30% (G2) filter for installation in ER-UP/G, ER-UPD, and ER-UPB flush-mounted housings. Suitable for single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by ± 5°, enabling equalization if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Leakage air volume flow less than 0.01 m³/h. Shaft level difference in accordance with DIN 52210-6, tested by IAB Oberursel. With VDE mark.
Product order
See all products