Best Morley products in the Audio effects category
On this page you'll find a ranking of the best Morley products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Morley 20/20 Power Wah Volume met buffer-circuit
The Power Wah Volume is the ultimate space-saving combo pedal. You get the classic Morley Power Wah with it’s vintage tone, wide sweep and 20 db clean boost and a smooth audio volume taper. Pedalboards rejoice!
Specs:
- Switchable combination Optical Wah and Volume Pedal.
- Boost knob allows up to 20 db of clean boost in Wah mode.
- Smooth Audio Volume Taper.
- New 20/20 Buffer circuit that prevents signal loss and maintains tone.
- Silent switching to prevent pops and noise.
- 6.85″ x 4.5″ x 2.5″ (L x W x H)
- Powered by one 9-volt battery or optional Morley 9V adapter. Compatible with most 9V adapters.
- MQ2 custom Inductor, LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip/toe-end logo.
2. Morley 20/20 Bad Horsie Wah effectpedaal
Our famous Bad Horsie Wah continues in our now standard pedalboard friendly size. Switchless, Optical and built like a tank. Now includes our new 20/20 Buffer to Defend Your Sound. Try one today and see why it’s used by countless professionals.
Specs:
- Our famous Bad Horsie Wah design. Switchless, Optical and built like a tank.
- Two Wah modes: Bad Horsie and Contour Wah.
- In Contour mode, two knobs adjust the Contour (Tone) and Wah Level.
- New 20/20 Buffer circuit that prevents signal loss and maintains tone.
- 6.85″ x 4.5″ x 2.5″ (L x W x H)
- Powered by one 9-volt battery or optional Morley 9V adapter. Compatible with most 9V adapters.
- MQ2 custom Inductor, LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip/toe-end logo.
3. Morley MTPDW 20/20 DISTORTION WAH
This little green monster packs a punch and is the perfect travel companion for the pedal minimalist. We’ve redesigned our classic PDW Distortion circuit to feature more gain, a new tone circuit and topped it off with a Switchless Wah. Save space on your board with two effects in one or throw it in your gig bag for when you just need one pedal to get the job done.
Specs:
- Distortion and Wah packed into one pedal.
- Distortion circuit comes after the Wah circuit for traditional combined tone.
- Switchless Wah activation, simply step on to activate and step off to bypass.
- Our acclaimed Optical circuitry that won’t wear down or get scratchy over time.
- New 20/20 Buffer circuit that prevents signal loss and maintains tone.
- 6.85″ x 4.5″ x 2.5″ (L x W x H)
- Powered by one 9-volt battery or optional Morley 9V adapter. Compatible with most 9V adapters.
- Silent Switching, won’t “pop” or bleed into audio signal when Distortion is engaged.
- MQ2 custom Inductor, LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip/toe-end logo.
4. Morley ABC-G GOLD SERIES SELECTOR / COMBINER
The Morley ABC adds an extra channel to our iconic ABY pedal. This extra channel adds to it’s versatility and is the perfect tool for multi-instrumentalists and those who like to use multiple amps at the same time. You can route one input to three outputs or reverse it and route three inputs to one output. This makes switching between instruments or amplifiers easy. It’s also completely passive so it doesn’t need a power source to function. Only the LED’s require power, which is great for conserving battery life.
Specs:
- Flexible routing: route one input to three outputs or reverse it and route three inputs to one output.
- Bypass switches for each channel
- Handy LED’s let you know which channels are active
- True Bypass
- Passive design, can be used without a power source. Only the LED’s require power.
- Powered by a standard 9V supply or 9V battery
- Robust Design built with Cold Rolled Steel
- Dimensions: 6.63″ L x 4.38″ W x 2″ H
- Current Draw – 2 mA
- NOT intended for use on powered speaker lines.
5. Morley MTCSW 20/20 CLASSIC SWITCHLESS WAH
The Classic Switchless Wah comes equipped with the great features our Wah pedals are known for. You get classic Wah-Wah tone with our MQ2 Inductor, dependable Electro-Optical circuitry, smooth and easy Switchless activation, and our 20/20 Buffer circuitry.
Specs:
- Switchless operation; Simply step on the treadle to engage the Wah and step off to bypass.
- Engineered to save space on your board; 6.85″ x 4.5″ x 2.5″ (L x W x H)
- Our world famous Electro-Optical design. No pots to wear out!
- Classic Wah tone with a custom MQ2 Inductor.
- 20/20 Buffer circuit ensures pure guitar tone and output.
- Glow-in-the-dark treadle rubber and Morley logo.
- Powered by one 9-volt battery or optional Morley 9V adapter. Compatible with most 9V adapters.
- Rugged cold-rolled steel housing, LED indication, quick clip battery door.
6. Morley MTPFW 20/20 POWER FUZZ WAH
Behold the mighty Power Fuzz Wah, one of the great Morley classics. The 20/20 version not only comes in a Pedalboard friendly size, but now has our acclaimed Switchless Activation. It offers our widest frequency sweep and when combined with it’s Fuzz circuit delivers monstrous Fuzz Wah tone that will send other Wah pedals into hiding.
Specs:
- One of the great Morley classics. Fuzz and Wah packed into one pedal.
- Fuzz circuit comes before the Wah circuit just like the original.
- Vintage Fuzz mode emulates that old-school ripped speaker sound that the original MPSA12 Transistors achieved. Modern Fuzz mode is tighter and more Guitar Distortion like.
- Switchless Wah activation, simply step on to activate and step off to bypass.
- Our acclaimed Optical circuitry that won’t wear down or get scratchy over time.
- New 20/20 Buffer circuit that prevents signal loss and maintains tone.
- 6.85″ x 4.5″ x 2.5″ (L x W x H)
- Powered by one 9-volt battery or optional Morley 9V adapter with 12ma Current draw. Compatible with most 9V adapters.
- Silent Switching, won’t “pop” or bleed into audio signal when Fuzz and Fuzz type are engaged.
- MQ2 custom Inductor, LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip/toe-end logo.
7. Morley MTMV2 20/20 VOLUME PLUS
Say goodbye to scratchy pots and worn out rope. The 2020 Volume Plus is the ultimate optical Volume pedal. It’s smooth Audio Taper is ideal for violin like and lap steel guitar type swells and it’s Minimum Volume control can perform a variety of functions including setting your Rhythm & Lead Volume and tremolo style sounds.
Specs:
- Optical Circuitry that will never wear down.
- Smooth Audio Taper ideal for violin type swells.
- Switchable Minimum Volume Control with LED indication
- 6.85″ x 4.5″ x 2.5″ (L x W x H)
- Powered by one 9-volt battery or optional Morley 9V adapter. Compatible with most 9V adapters.
- Silent switching, no “pops” or bleed when activated.
- Glow in the Dark Treadle Rubber and Toe-End Logo.
- Cold-rolled steel housing.
8. Morley ABY-G Gold Series signaal splitter en combiner
The Morley ABY was introduced in the early 1980’s, but when a young engineer named Scott Flesher joined Morley a decade later, little did we know his redesign would go on to become one of the most popular utility pedals of all time. The latest Gold Series version comes with upgraded, quieter circuitry and a fresh new look. It’s simple, robust and versatile. There are many different ways to use the ABY. You can route one input to two outputs or reverse it and route two inputs to one output. This makes switching between guitars or instruments a breeze as well as using multiple amplifiers. It’s also completely passive so it doesn’t need a power source to function. Only the LED’s require power, which is great for conserving battery life.
Specs:
- Routes one input to two outputs or two inputs to one output
- Handy LED’s let you know which channel is active
- True Bypass
- Powered by a standard 9V power supply or 9V battery
- Cold Rolled Steel Enclosure for Maximum Protection
- Dimensions: 5.25″ L x 3.25″ W x 2″ H
- Current Draw – 2 mA
- NOT intended for use on powered speaker lines.
9. Morley MLLS LINE LEVEL SHIFTER
The Line Level Shifter’s primary function is to increase or decrease signal voltage back and forth between -10dBu and +4dBV (depending on which way you route through it). The Line Level Shifter® also breaks loop antenna that causes ground hum and buzz, as well as converting back and forth between balanced and unbalanced connections AND preventing the cable to act as an antenna for noise. Simply place a channel of theLine Level Shifter® on the cable connections between the two mismatching pieces of equipment.Line Level Shifter® will not affect the quality of the audio, it will improve it. We use 1/4″ smart jacks that accept any combination of unbalanced (TS) or unbalanced (TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards and top quality components and hardware.
Specs:
- 1/4″ Smart Jacks and XLR Jacks
- Jacks Can Be Used in Any Combination
- Dimensions: 4.75″ (L) / 3.25″ (W) / 1.75″ (H)
- Converts Signal Voltage Back and Forth Between -10dBu and +4dBV
- Custom Morley Step Up/Down Isolation Transformers
- Prevents Ground Loops That Cause Hum and Buzz
- Convert Back and Forth Between Unbalanced and Balanced Connector Types
- Simply Insert on Audio Connections Between Offending Pieces of Gear
- Not Intended for Use on Mic Level, Instrument or Powered Speaker Lines.
10. Morley 20/20 Wah Lock effectpedaal
The Wah Lock is our most versatile Wah. Do you want the ease of Switchless activation, but also the ability to cock it? Say no more … The Wah Lock mode emulates a fixed position Wah giving you both. The third WHOA mode also shifts the envelope over to give you a deep vocal Wah sound, which is great for high gain, horns and Bass Guitar.
Specs:
- Switchless, Optical Wah with three Wah modes: Wah, WHOA and Wah Lock
- 20db Boost is functional is all three Wah modes.
- Wah is set for standard Morley Wah Tone, WHOA is exaggerated Wah Tone with gritty vocal-like overtones, and Wah Lock emulates a fixed position Wah. Notch knob dials in the frequency.
- Wah Lock works with both Wah and WHOA modes.
- New 20/20 Buffer circuit that prevents signal loss and maintains tone.
- Silent switching to prevent pops and noise.
- 6.85″ x 4.5″ x 2.5″ (L x W x H)
- Powered by one 9-volt battery or optional Morley 9V adapter. Compatible with most 9V adapters.
- MQ2 custom Inductor, dual LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip/toe-end logo.
