Handlebars
−8%
EUR93,25 was EUR101,31
Reverse Nico Vink Signature Series handlebar Ø31,8mm 810mm
31.80 mm
Best selling Handlebars from Reverse
This page always stays fresh and updates automatically.
1. Reverse Nico Vink Signature Series handlebar Ø31,8mm 810mm
Whether it's during a rampage, on super rough terrain, or simply for big jumps - a handlebar you can trust and that can withstand a lot is essential. That's why Reverse Components relies on an aluminum handlebar with reinforced walls to maximize durability and stability. The handlebar is 810 mm wide and can easily be shortened to personal preferences thanks to the printed scale.
• Purpose: Freeride / Downhill
• Weight: 390 g
• Details:
- Can be shortened in 10 mm increments down to 720 mm
- Weight: 390 g (+/- 5% production tolerance)
- Anodized and shot-peened for extra long durability
• Material Type: Aluminum
• Material Details: Aluminum 7075 (double-butted)
• Width: 810 mm
• Handlebar Clamp: 31.8 mm
• Rise: 18 mm
• Upsweep: 5 °
• Design: Riser
• Backsweep: 7 °.
2. Reverse E-Elet handlebar Ø31.8mm 740mm
The ELEMENT handlebars of the E-Series are characterized by exceptional stability. With the new ELEMENT Butting technology, Reverse has made it possible to construct the ELEMENT handlebars sturdier than ever before, all while achieving an impressive weight! The ELEMENT handlebars are also approved by Reverse for use on E-MTBs.
Category 4: Bikes in this category are suitable for very rough and partially blocked terrain with steeper slopes and consequently higher speeds. Regular, moderate jumps of up to approximately 122 cm by skilled riders pose no problem for these bikes. Full-suspension bikes with medium travel are typical for this category.
• Purpose: MTB
• Material Type: Aluminum
• Material Details: Element Butted Aluminum
• Width: 740 mm
• Handlebar Clamp: 31.8 mm
• Designed for E-Bikes
• Design: Riser
• Backsweep: 9°
• Upsweep: 4°.
3. Reverse Handlebars Nico Vink Ø35mm / 810mm, Rise 48mm copper
Whether at the Rampage, in the Chatel bike park, or on the Enduro bike – Nico trusts this handlebar, as its increased wall thickness withstands even the toughest demands. We designed this handlebar according to his specifications and preferences, which is why it deserves his personal logo. The Nico Vink Signature Handlebar is intended for those who prioritize stability and reliability over lightweight construction.
Features:
- Width: 810 mm
- Diameter: 35 mm
- Rise: 48 mm
- Upsweep: 5°
- Backsweep: 9°
- Weight: 398 g (± 5% weight tolerance)
- Material: Aluminum 7075 (double-butted)
Color:
Black (anodized and pearl-blasted for extra durability)
Extras:
- Extra reinforced 7075 aluminum for maximum stress
- Cutting lines: for guidance when shortening the handlebar
- Alignment lines: as a guide for centering the handlebar during installation.
4. Reverse Base Handlebar Riser 790 mm Bar - 35 mm - black/stealth
Our Base handlebar has become one of the most popular handlebars in the community. With a width of 790 mm, it can be used in downhill, all-mountain, and enduro riding. A wide handlebar is particularly well-suited for transferring maximum pressure to the front wheel and optimally supports the rider. Made from double-butted 7075 aluminum, this handlebar always provides the necessary safety, even under the most demanding conditions.
No other Reverse handlebar offers such a wide range of different rise and clamp options. The handlebar shown here has a clamp diameter of 35.0 mm, which is becoming increasingly common in the market. The two rise options of the Base 790 allow for customization to meet the individual needs of the user and to adjust their cockpit accordingly.
Material: AL 7075
Clamp Diameter: 35.0 mm
Rise: 18 mm or 35 mm
Width: 790 mm
Upsweep: 5°
Backsweep: 7°
Weight: 346 / 327 g (+/- 5% weight tolerance).
5. Reverse E-Elet handlebar Ø35mm 770mm
The ELEMENT handlebars of the E-Series are characterized by exceptional stability. With the new ELEMENT BUTTING technology, Reverse has made it possible to construct the ELEMENT handlebars stronger than ever before while maintaining a sensational weight. The ELEMENT handlebars are also approved by Reverse for use on E-MTBs.
Category 5: This category represents very demanding, heavily blocked, and extremely steep terrain. Larger jumps at very high speeds, as well as intensive use of designated bike parks or downhill trails, are typical for this category. Full-suspension bikes with long travel, as well as dirt bikes, define this category.
• Intended use: MTB
• Designed for E-bikes
• Material specifications: Aluminum
• Material type: Aluminum
• Material details: Element Butted Aluminum
• Width: 770 mm
• Handlebar clamp: 31.8 mm
• Design: Riser
• Backsweep: 9°
• Upsweep: 4°.
6. Reverse Nico Vink Signature Series
Whether at the Rampage, in the Bikepark Chatel, or on the Enduro bike – Nico trusts this handlebar because its increased wall thickness withstands even the toughest demands. Reverse has designed this handlebar according to his specifications and preferences, which is why it deserves his personal logo. The Nico Vink Signature Handlebar is intended for those who prioritize stability and reliability over lightweight construction.
• Handlebar clamp: 31.8 mm
• Intended use: MTB
• Weight: 390 g
• Details:
- Cutting lines for guidance when shortening the handlebar
- Alignment lines for centering the handlebar during installation
• Material type: Aluminum
• Material details: extra reinforced 7075 aluminum for maximum durability
• Width: 810 mm
• Backsweep: 7 °
• Rise: 35 mm
• Upsweep: 5 °
• Design: Riser.
7. Reverse Base Handlebar Ø 31.8 mm
The new Reverse Base in the World Cup Edition does not feature the usual 9° backsweep but comes with a 7° backsweep. Thanks to the reduced backsweep, you save a lot of energy on longer descents, as the center of gravity of the handlebars is more "front-heavy." This allows for more extended arms, making the bike easier to handle.
Additional information:
All Reverse handlebars and stems are tested according to the EFBE standard MTB-G. The "G" stands for Gravity. The components undergo a three-phase test:
1. 100,000 cycles of opposing and same-phase load.
2. Maximum load test under intended use conditions.
3. Overload test beyond intended use to simulate foreseeable misuse or accident damage.
Especially for lightweight and carbon components, these maximum and overload tests are extremely important for the rider, ensuring that they can rely on the material even in extreme situations.
• Purpose: MTB
• Weight: 298 g
• Details: - 18 mm or 38 mm Rise
• Material type: Aluminum
• Width: 790 mm
• Handlebar clamp: 31.8 mm
• Rise: 18 mm
• Upsweep: 5°
• Design: Riser
• Backsweep: 7°.
8. Reverse Youngstar
Reverse consistently observes that children's bikes often lack ergonomic consideration in their initial setup, leaving kids with little opportunity to position themselves comfortably on their bicycles. The handlebar width should reflect a balanced ratio between shoulder width and arm span. With this approach, the Youngstar handlebar has been developed. The Youngstar is a lightweight aluminum handlebar that provides children with an optimal position due to its reduced width and rise. These features, along with the increased backsweep, allow for quicker position changes, more active bike control, and support the child in maintaining an ergonomic posture while riding.
General size recommendations for children's handlebars:
- 115-130 cm → 560 mm handlebar
- 130-145 cm → 620 mm handlebar
- 140-155 cm → 660 mm handlebar
Material details:
- Aluminum 6061
- Intended use: Children / Youth
- Weight: 248 g
- Details:
- Child-friendly ergonomics
- Alignment lines: as a guide for centering the handlebar during installation
Handlebar:
- Design: Riser
- Backsweep: 9°
- Rise: 22 mm
- Upsweep: 5°
Measurements:
- Width: 560 mm
- Handlebar clamp (mm): 31.8 mm
Main information:
- Material type: Aluminum.
9. Reverse Nico Vink Handlebar 810 mm Ø35.0 mm / 48 mm - Black
Whether at the Rampage, in the Chatel bike park, or on the Enduro bike, Nico trusts this handlebar as it withstands even the toughest demands with its increased wall thickness.
We designed this handlebar according to his specifications and preferences, which is why it deserves his personal logo. The Nico Vink Signature Handlebar is intended for those who prioritize stability and reliability over lightweight construction.
Material: Aluminum 7075 (double-butted)
Width: 810 mm
Clamp: 35.0 mm
Rise: 48 mm
Backsweep: 9°
Upsweep: 5°
Weight: 390 g (+/- 5% weight tolerance)
Color: Black (anodized and bead-blasted for extra durability) / White
Extras
E-Safety Level: Category 5 (Maximum)
EFBE E-MTB Tri Test (EPAC MTB-GR) tested
Extra reinforced 7075 aluminum for maximum load
Cutting lines: for guidance when shortening the handlebar
Alignment lines: as a guide for centering the handlebar during installation.
10. Reverse base
The Base handlebar has become one of the most popular handlebars in the community. With a width of 790 mm, it can be used in downhill, all-mountain, and enduro riding. A wide handlebar is particularly effective for applying maximum pressure to the front wheel and optimally supports the rider. Made from double-butted 7075 aluminum, this handlebar always provides the necessary safety, even under the toughest conditions. The handlebar shown here has a clamp diameter of 31.8 mm, which remains the most common size on the market. The two rise options of the Base 790 allow for customization to meet the individual needs of the user and to adjust their cockpit accordingly.
• Intended use: MTB
• Weight: 303 g
• Material details: Aluminum 7075 (double-butted)
• Backsweep: 7 °
• Rise: 35 mm
• Upsweep: 5 °
• Design: Riser
• Width: 790 mm
• Handlebar clamp: 31.8 mm
• Material type: Aluminum.
Product order
See all products