Danfoss Heating Mat DTCE-175 680W

Manufacturer: Danfoss
Designation: Heating Mat 230V
Type: DTCE-175 680W
With Carrier Mat: yes
Fixation of Heating Cable: glued
Self-adhesive: no
Connection Power: 680 W
Power: 175 W/m²
Heating Cable Load: 13.2 W/m
Number of Cold Leads: 1
Length of Cold Leads: 6000 mm
Suitable for Wet Rooms: yes
Suitable as Outdoor Heating: no
Suitable as Roof Heating: no
Area: 3.8 m²
Length: 5100 mm
Width: 750 mm
Thickness: 7.5 mm
With Controller: no
With Room Thermostat: no
With Floor Temperature Sensor: no

Danfoss Heating Mat DTCE-175 680W: additional details
Heating mat with a connection cable suitable for installation in or under the screed. Suitable for use in dry, damp, or wet rooms. With additional protective sheath for the use of RCD protection. This heating mat system is particularly suitable for installation in awkward and/or large areas, as the return of the second connection is not necessary. Includes factory-installed waterproof connectors and a 6 m long cold lead, heating cable according to IEC 60800, voltage: 230 V, rated limit temperature: 80°C, specific heating output: 175 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, outer diameter: 7 mm, minimum bending radius: 5 x dA, protection class: IP X7, area 3.8 m², 0.75 x 5.1 m.