Pepperl+Fuchs Fabrik Retro-reflective sensor OBG8000-R201-2EPIOV1 Manufacturer :Pepperl+Fuchs Fabrik Designation :Retro-reflective sensor (glass) Type :OBG8000-R201-2EPIOV1 Pre-failure signal :no With time function :no Max. switching distance :9000 mm With reflector :no Max. switching distance :9000 mm With reflector :no Analogue output 0 V ... 10 V :no Analogue output 0 mA ... 20 mA :no Analogue output 4 mA ... 20 mA :no Analogue output -10 V ... +10 V :no With communication interface analogue :no With communication interface AS-Interface :no With communication interface CANOpen :no With communication interface DeviceNet :no With communication interface Ethernet :no With communication interface INTERBUS :no With communication interface PROFIBUS :no With communication interface RS-232 :no With communication interface RS-422 :no With communication interface RS-485 :no With communication interface SSD :no With communication interface SSI :no Electrical connection type :M12 connector Switching output type :PNP/NPN Housing type :Cuboid Width of sensor :15 mm Height of sensor :61.7 mm Length of sensor :41.7 mm Material of the optical surface :plastic Material of the housing :plastic Voltage type :DC Light type :red light polarised Pepperl+Fuchs factory photoelectric reflex switch OBG8000-R201-2EPIOV1: further details Operating range: 0 ... 5.6 m in teach mode 0 ... 8 m with switch set to &quotN&quot, Light emitter: LED, Light type: Red, Alternating light, Signal output: 2 push-pull outputs, Short-circuit-proof, Reverse polarity protected, Overvoltage-proof, Interface type: IO-Link ( via C/Q = Pin 4 ), Circuit type: The circuit type of the sensor can be switched. The delivery state is: C/Q - Pin4: NPN normally open / dark switching, PNP normally closed / light switching, IO-Link /Q - Pin2: NPN NC contact / light switching, PNP NO contact / dark switching, Connection: Device plug M12 x 1, 4-pin, 90° rotatable, Operating voltage: 10 ... 30 V DC, ambient temperature: -20 ... 60 °C (-4 ... 140 °F) , EAN: 4050143050659.