
Absima Modelling battery pack (LiPo)
7.40 V, 600 mAh
We use cookies and similar technologies to provide you with the best shopping experience as well as for marketing purposes. Please accept, decline or manage the use of your information.
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
The trend is towards a second battery - for even longer driving fun. With this replacement battery, you can expect up to 45 minutes of extra time during which your Absima 1:18 Micro Crawler can overcome various obstacles.
Absima Modelling battery pack (LiPo)
7.40 V, 600 mAh
Tattu R-Line Version 5 6S 1400 mAh 150C is a Lipo battery with a high discharge rate for FPV quads. Voltage - 22.2 V Capacity - 1400 mAh Number of cells - 6Type of balancer - JST-XHR Connector type - XT60 Discharge current (continuous) - 150C Discharge current (peak) - 260C Length - 78 mm Width - 38 mm Height - 40 mm Weight - 223 g. First use of X-Technology aluminium boehmite Very even and continuous power output. Less power drop after cycles. Higher discharge platform Resistance to dropping Safety instructions. Do not discharge below 3.0 V per cell. Charge only with a microprocessor-controlled charger in lithium polymer pack charging mode. Do not short-circuit the terminals, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers.
Product description:
Voltage: 14.8 V
Capacity: 2300 mAh
Number of cells: 4
Connector type: XT60
Type of balancer: JST-XHR
Discharge current: 75C
Length: 105 mm
Width: 33 mm
Height: 28 mm
Weight: 270 g
Specifically for UAV use, the Tattu brand has designed new batteries with unrivaled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy platforms for commercial applications. Batteries often look similar from the outside; their real power, however, lies on the inside. The cells in Tattu batteries are developed specifically for UAV requirements.
Safety manual:
Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode. Do not short-circuit the poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared...
Elevate your RC racing experience with the Absima Greenhorn Vol.2 LiPo 3S 11.1V-50C 6000 SC (XT90/T-Plug). This battery is meticulously engineered to meet the high demands of RC racing, ensuring that each unit is rigorously tested for capacity, voltage, and internal resistance before shipment. Its remarkable 6000mAh capacity offers extended run times and consistent power, pushing your RC car's performance to the limits. Battery Specifications: Cell Technology: LiPo (Lithium Polymer) Voltage: 3S / 11.1V Capacity: 6000mAh Discharge Rate: 50C Watt Hours: 66.6Wh Charge Rate: up to 3C (1C charging recommended) Case Type: Softcase Recommended for: RC Car Connectors & Cables: Power Connector: XT90 with an adapter for T-Plug Power Cable: 12 AWG Silicone Cable Cable Length: 100mm Balancer Connector: JST - XH - 2S Balancer Cable: 24 AWG Silicone Cable Dimensions: Length: 138mm Width: 47mm Height: 35mm Weight: Approx. 395g ± 20g Safety and Usage Notes: Charger Compatibility: Use only a charger appropriate for this type of battery. Age Suitability: Not suitable for children under 14 years. Must be used under direct adult supervision. Safety Warnings: Please adhere to the warnings provided with the battery and charger. The Absima Greenhorn Vol.2 LiPo is your ultimate power source, offering not just impressive energy storage but also superior performance and reliability in the heat of competition. Drive your RC car beyond its limits and experience the difference a high-capacity, high-performance battery can make.
Absima Greenhorn Vol.2 LiPo 3S 11,1V-50C 6000 SC (XT90/T-Plug)
11.10 V, 6000 mAh
WELLPOWER lipo batteries with the sensational price-performance ratio! SE" series = high-quality workmanship + outstanding performance data + best price-performance ratio! Depending on the type -100C loadable (peak current) and charging currents of up to 8 times the nominal capacity make our "Wellpower" lipos the 1st choice for the ambitious model builder. Balancer plug-in system "XH". Version "V2" is supplied as standard with a Liposafe specially made to suit the battery size (from 1000mAh). For maximum safety during transport and storage. The battery and Liposafe can even be installed directly in the model. (Note the temperature development!). For price-conscious model builders, we offer the ECO series, with a slightly lower nominal load capacity and without Liposafe, but with the familiar quality features at an unbeatable price. Splitpacks have two balancers and 4 main power connections. ULTIMA" version with real 35C or 60C continuous load and peak between 70C and 90C (1sec.) or 120C (max.0,5sec.) for uncompromising applications like competition. "CHECK" version with standard built-in LED voltage indicator for quick test of battery charge status: Figures in brackets apply only to short-term load! (max. 5 seconds)Charging currents: "CHx" specifications indicate the maximum permissible charging current. For CH2, for example, 2 times the nominal capacity (i.e. for a 2.0Ah battery max.4A) , CH6 6 times the value etc.Tip: The max. continuous discharge current is only recommended with active temperature monitoring!Preheating cold batteries increases their performance and service life.gt;Never let batteries get hotter than 60°CRecommended storage voltage 3.70... 3.80 V / cellProtect against short-circuit, mechanical damage, overheating, deep discharge, etc.Protect against short-circuit, mechanical damage, overheating, deep discharge and overchargingOnly charge with a suitable lipo charger on a fireproof base Do not continue to use damaged cells !Never charge or discharge unattended ! 3543.
Wellpower LIPO AKKU ULTIMA 4200 MAH / 22,2 VOLT 6S 35/70C CH5/8 xt-60
22.20 V, 4200 mAh
Wellpower Ultima Lipo batteries offer a sensational price-performance ratio. Outstanding performance specifications and the best value for money make our Wellpower Lipos the top choice for ambitious model builders.
The Wellpower Ultima Lipo batteries are characterized by genuine performance data, without the common exaggeration of specifications that is typical in the market.
The Ultima GT II series features a central cable outlet, allowing for optimal space utilization in narrow glider fuselages. This prevents snagging caused by side-mounted cable guides, as found in conventional Lipo batteries.
2800/35-3S+GT II.
Wellpower LIPO AKKU ULTIMA GT II 2800 mAh / 11,1 Volt 3S 40/80C CH5/8 XT-60
11.10 V, 2800 mAh
Gens Ace 5000 mAh 18.5 V 60 C 5 S1P Lipo Battery
The Gens Ace Lipo 5000 mAh 5S1P 60C Lipo battery pack features remarkable stacking technology that allows for individual cell capacities of 5000 mAh. With high discharge performance and high energy density, Gens Ace batteries offer high quality and reliable performance. This battery is suitable for 700 size helicopters.
Gens Ace 5000 mAh 5S Specifications:
- Capacity: 5000 mAh
- Voltage: 18.5 V / 5 S
- Discharge Rate: 60 C
- Weight: 620 g
- Size: 161 x 45 x 37 mm
The Gens Ace Lipo 5000 mAh 5S1P battery is suitable for scale gliding at 1:700 for helicopters.
Gens Ace 5800mAh 60C 18.5V 5S1P LiPo battery with XT90 plug connector
The Gens Ace battery with XT90 plug connector provides a trusted power source, ideal for use in 700-class helicopters and glider flight models. With a capacity of 5800 mAh, it offers a high discharge rate and energy density. The discharge rate of 60C allows for smooth and stable operation. Thanks to the XT90 plug connector, the connection is always reliable.
Gens Ace 5800mAh 60C 18.5V 5S1P Lipo Battery Pack with XT90 plug
18.50 V, 5800 mAh
Gens ace Redline Series 6000mAh 15.2V 130C 4S2P HardCase HV LiPo Battery
With a capacity of 6000 mAh and a voltage of 15.2 V, the Gens ace Redline Series battery is a powerful energy source that is reliable and high-performing even for the most demanding applications. Thanks to the stable automatic stacking technology, the individual cells can achieve a capacity of 6000 mAh, ensuring stable performance. The process of matching the individual cells for capacity, voltage, resistance, and discharge curve is extremely rigorous, guaranteeing excellent consistency and performance. The use of high-quality raw materials from Japan and Korea ensures not only reliability but also long-term performance. This battery is suitable for all 1/8 scale cars.
Gens Ace Redline Series 6000mAh 15.2V 130C 4S2P HardCase 69 HV LiPo Battery
15.20 V, 6000 mAh
The Gens Ace battery is a lithium-polymer battery specially designed to meet the needs of ARRMA vehicles. With a capacity of 8000 mAh and a voltage of 14.8 V, it offers long-lasting power and optimised performance. With a weight of 740 g, the battery measures 157 × 55 × 42 mm, which allows it to fit easily into standard battery compartments. An additional advantage is the use of the JST-XHR balancing connector and the EC5 discharge connector, which increase compatibility and efficiency of use. The housing, which is made of a combination of PC and silicone rubber, provides double protection that not only protects the battery from mechanical damage, but also improves the stability of its attachment to vehicles.