Questions about Aeno Infrared radiant heater Premium Eco Smart GH1S

Anonymous

1 year ago

Is only the German plug type F included in the scope of delivery or also the Swiss plug type J?

2 answers

Drumm

1 month ago

Is it possible to heat a room of 18 m2 with warm walls and a warm floor with this product, or do the walls remain cold as if you heat with a fan heater?

1 answer

Galaxus

1 month ago

Helpful answer

With this infrared heater with 700 W heat output, you can heat a room of 18 m², whereby the radiant heat warms the walls and thus ensures warm walls, in contrast to a fan heater, which mainly heats the air and leaves the walls cold. The appliance works with infrared radiation, which heats objects and walls in the room directly, creating a pleasant indoor climate with warm surfaces. The heat is distributed evenly and the walls and floor are also warmed by the radiant heat, which is not the case with a fan heater. The heat output of 700 W is designed for rooms up to 30 m², so the 18 m² area is well covered. In addition, the infrared heater does not dry out the air and does not burn oxygen, which makes the room climate more pleasant than with convective heaters such as fan heaters. The temperature of the heating panel is adjustable and the device works efficiently by keeping the room temperature constant in SMART mode. To summarise: The walls and floor are warmed by the infrared radiation, not just the air, so you can achieve a pleasant, warm indoor climate with warm surfaces with this heater.

Automatically generated from the .

davide.benato

6 months ago

can it be mounted vertically with the provided stand?

1 answer

Galaxus

6 months ago

The provided stand for this product is designed to be used in a stand-alone configuration, allowing the heater to be placed on the floor. While it can be mounted on the wall, the stand itself is not intended for vertical mounting. For wall mounting, the included brackets are used instead.

Automatically generated from the .

thomas.wyler

10 months ago

Can this radiant heater also be mounted on the ceiling?

1 answer

Galaxus

10 months ago

Yes, the "Infrared radiant heater Premium Eco Smart LED GH3S (700 W)" from Aeno can be mounted on the ceiling. There are a few important points to note here: - Ceiling mounting enables efficient and even heat distribution in the room, as the heat comes from above. - It is important to mount the radiant heater at a height of between 1.80 and 2.60 metres to ensure optimum heat radiation. - Make sure that the radiant heater is mounted slightly offset in the area you want to heat to avoid uncomfortable overheating. - Make sure that the radiant heater's beam area is not blocked by furniture or other objects. Correct installation and positioning allows the radiant heater to develop its full effect and heat the room efficiently.

Automatically generated from the .

Anonymous

1 year ago

May I mount it on the ceiling as well?

4 answers

moaaa_1234

1 year ago

Helpful answer

There's no indication in the instructions that a "flat" installation can be carried out, so I'd say not. However, it doesn't make sense to put a radiator on the ceiling as the heat rises, so you'll be heating a lot for very little (this is just my opinion). Best regards

Anonymous

1 year ago

Hello, I'd like to know if it heats well, where kusi kusa for a room of 30m °.

1 answer

muttersfreizeitpony

1 year ago

Hello Anonymus, You should know that (in my opinion) it's not really possible to heat a room. It's more suitable for heating a specific area of the room. Today, I work in my home office and I've placed the thing right next to me. So it heats quite well. But the rest of the room is still quite cool (I have to say that our flat is very cold). I hope I've answered your question.

Anonymous

1 year ago

Hello, I'd like to know if it heats well, where kusi kusa for a room of 30m °.

2 answers

Anonymous

1 year ago

Hello, I'd like to know if it heats well, where kusi kusa for a room of 30m °.

1 answer

SilverSnow

1 year ago

Our room is about 24m2 and it heats well.

Anonymous

1 year ago

What are the exact dimensions length × height× thickness Because galaxus it seems to me that they were wrong

3 answers

Anonymous

1 year ago

Heloo, is there a remote control with a thermostat? I'm looking for an infrared model with a thermostat.

2 answers

Anonymous

1 year ago

Does the product in white also have the option of being controlled via an app?

1 answer

Fabian Müller

1 year ago

This is the black version, but any colour can be controlled with the app.

Anonymous

1 year ago

What type of plug is installed? T13 also IP44?

1 answer

ebarrera

1 year ago

not CH plug... had to reorder adapter via support... after 1-2 weeks I had it all good with the adapter

SilverSnow

1 year ago

Hello, how long is the cable?

1 answer

yoganante

1 year ago

Helpful answer

ca.2m. attention wifi only remote control or hand-held but without thermostat

netdoczuercher

1 year ago

Hello everyone, can I also mount the part on the ceiling? From above, there are fewer obstacles in the room than near the floor.

1 answer

dschneider

1 year ago

Helpful answer

Yes, I have done that too. However, the description says that this should not be done. But it worked for me without any problems. The first thing you have to do is turn off the fall-over detection via the app. Otherwise the heating starts beeping wildly because it thinks it has fallen over. I am satisfied.

marijan.valle

1 year ago

I have installed the device, everything is recognised and connected to the internet. Now I have to do a firmware update. I say yes, but unfortunately nothing happens....for minutes it says Check for updates... although the file is small. Does anyone know this problem and is there a solution?

1 answer

ellumfritzum

1 year ago

It worked for me without any problems...

tmingot

1 year ago

Hello, does the electrical socket meet Swiss standards or do I need to add an adapter? Thank you in advance for your reply. Thank you in advance for your reply.

2 answers

moemen.aly

1 year ago

Helpful answer

Hi Tmingot, the heater comes with the Swiss plug. I have had it for just under 2 weeks and am very enthusiastic. LG Miimo

gmu1962

2 years ago

Hello all I would like to operate the infrared heater "Aeno Infrared Heater Premium Eco Smart GH1S" using a switched socket as I have a Homematic home automation system. Will the heating switch on again with the set settings after a power cut? Many thanks and greetings Guido

3 answers

beat

2 years ago

Helpful answer

Yes this switches on again with the settings.

Limalhas

2 years ago

Is it suitable for an old cottage? Wooden walls and wooden floor. I'd rather know if it's safe.

2 answers

swissreg

2 years ago

Helpful answer

Yes, very stable

Your data. Your choice.

Search

Questions about Aeno Infrared radiant heater Premium Eco Smart GH1S

What would you like to know?

0 questions and answers

Is only the German plug type F included in the scope of delivery or also the Swiss plug type J?

Is it possible to heat a room of 18 m2 with warm walls and a warm floor with this product, or do the walls remain cold as if you heat with a fan heater?

can it be mounted vertically with the provided stand?

Can this radiant heater also be mounted on the ceiling?

May I mount it on the ceiling as well?

Hello, I'd like to know if it heats well, where kusi kusa for a room of 30m °.

Hello, I'd like to know if it heats well, where kusi kusa for a room of 30m °.

Hello, I'd like to know if it heats well, where kusi kusa for a room of 30m °.

What are the exact dimensions length × height× thickness Because galaxus it seems to me that they were wrong

Heloo, is there a remote control with a thermostat? I'm looking for an infrared model with a thermostat.

Does the product in white also have the option of being controlled via an app?

What type of plug is installed? T13 also IP44?

Hello, how long is the cable?

Hello everyone, can I also mount the part on the ceiling? From above, there are fewer obstacles in the room than near the floor.

I have installed the device, everything is recognised and connected to the internet. Now I have to do a firmware update. I say yes, but unfortunately nothing happens....for minutes it says Check for updates... although the file is small. Does anyone know this problem and is there a solution?

Hello, does the electrical socket meet Swiss standards or do I need to add an adapter? Thank you in advance for your reply. Thank you in advance for your reply.

Hello all I would like to operate the infrared heater "Aeno Infrared Heater Premium Eco Smart GH1S" using a switched socket as I have a Homematic home automation system. Will the heating switch on again with the set settings after a power cut? Many thanks and greetings Guido

Is it suitable for an old cottage? Wooden walls and wooden floor. I'd rather know if it's safe.

Related categories

Related articles